Search results

If the heating is on, just place them on the radiator for a few minutes before serving!

Hi guys, someone did mention to be the control panel cannot power two bell boxes?

Yeah its not very difficult, I had the enforcer kit 3 (standard one) with 6 sensors, 1 door contact, 1 arming station and a bell box. I went for the standard one, as I am thinking of getting CCTV installed. But, there is a cost of £30 per year (Quote me if I am wrong) to be on the cloud. You...

I went for the Pyronix Enforcer, very easy to install after a few tries. Cost around £400 in total. I can recommend you a supplier.

Aha thank you. I had a feeling the term siren was incorrect

Brand new. But it was on the wall with the jumper on battery for a few weeks without mains power.

I pushed it down so I heard the click

I closed the tamper switch and the siren still rang. Will see if the battery charges lol

I have put the jumper on battery, when it was on test the siren came on

Thank you

ok I will have a look. Thank you

ok thank you, will give this a try!

Hi guys, happy new year! Can anyone tell me what this is and how do I get rid of it? the wall is adjacent to the neighbors and the floor does feel like it's going down a wee bit too. Thank you guys.

Thank you. And the jumpers on both test and battery?

?

ok and what connections?

Yes, when connected the bell box does not do anything if I remove the jumpers the bell box is fine, I will leave it connected for 24hrs for the battery to charge up. What connections? Do I put the jumpers on test or batt?

How can I solve this?

It seems as though only one bell box is getting power. With all wires connected

Hi guys update. I managed to get one bell box working. However the one at the rear is giving me some issues. I have removed it from the wall and rewired at the panel. Once I remove the battery link the alarm seems to be working with one steady led light as opposed to them flashing. Once the...