Search results

anyone ? And any other recommendation for a quality, silent, pump and is 1-1.5 ok for a single shower

:idea: set it to max cold, blow up one of the inlets and see which one is the least restrictive. that'll be the cold. to make sure, set it max hot and do the same.

Agreed, like a TAMIYA NICAD POWER PACK connector Howeverm there must be hundreds of OEM connectors similar to this, so unlikely you'll ever trace one other than the OEM.

what about electical conduit ? about £2.50/mtre http://www.tlc-direct.co.uk/Main_Index/Conduit_Steel_Index/20mm_BE_Conduit_and_Fittings/index.html

As an owner of American vehicles in the UK, I can confirm that the Accessory / cigar lighter socket is the same as UK and European ones in size, voltage and polarity

Have had a 2storey side extension built and to diversify the water feeds (rest of house on a combi) was looking to install cold water and immersion heater tanks to feed the that side of the house. It will need to feed a new en-suite bathroom (shower, basin, toilet) and a cloak-room toilet...

Cannot see the original picture but there are products already out there including this and

(Re: red-herring to your location....) Anyways, theirs are only £6.50 + vat Anyone else seen these around for sale ?? I guess they are too heavy and not valuable enough to be found in a reclemation yard ?

[/b] :shock: HOW MUCH !!!! :shock: (thanks for the red-herring - mitcham company - you need to get out more :D )

[/url] And they do the same as the top picture ??

:shock: Errrr. no I wont, just worked out It will cost over £1000 to repalce them all !!!! Will stick with trying to locate 30 matching ones :?

Surrey They dont exactly show much ? If i cant get a match, i'll probably replace them all !

need to replace about 30, does anyone still make these in this design ? 6'X12"

been using 100mm soil pipe for ducting through walls for 4" fans, dodn't know why I didn't think of 160mm for 6" :eyes: Thanks for the kick up the jacksie :D

They only seem do the flexible stuff - suppose that would be ok but as its such a long run thought rigid would be better

Need to fit a kitchen 6" fan, but need to duct it 5 meters through an extension ceiling. Anyone know where to get 6" ducting ? or a suitible fan powerful enough..............

I just think back to my fishing days when I used to close the lead shot around the line using my teeth :shock:

Cheers, actually found that today as can't find the original installation book, however, cannot actually see requirements for air brick etc.... it does say on one page, "The appliance may be installed into an airing cupboard if required.See section "Air supply:" I cannot find a section "air...

Makes sense but only "cleaned" the lead as far as the copper would go down. And surely much better than drinking tank water :D

????? Why ???? My mains came in on lead went throught the cupboard under the stairs without stopping and arrived at the tank in the loft... all cold water feeds ran from the tank, including the kitchen supposedly "drinking water" :shock: Soon diverted that :wink: