Search results

Thanks Dave m but that doesn't allow conversion of files from i tunes does any have any more suggestions ?

Follow jim'll fix it's advice, if the system then sets that alarm sensor is faulty and requires replacement. If it still doesn't set then it's cable or zone fault.

Each device should ideally be on it's own cable wired back to the main control unit. Typically depending on system you use 4 to 6 cores for PIRs and 2 to 4 cores for door contacts and PA's. Bells generally use 5 cores. The easiest way to do it is to run an 8 core to each point this allows for...

That sounds correct from memory 8)

Hi guys im looking to convert files from an itunes library (m4a files) into conventional mp3 format for use with a sony walkman mp3 player. Can anyone recommned a good free download software that will allow me to do this ?

Hmmm possibility I suppose but pretty shoddy way of doing it isn't it. Ill have a look behind the back box. Would there also be a live at the light end as well ?

But these are seperate switches controlling seperate lights not linked together in anyway. How would that work ?

Many thanks Spark 123 just wanted clarification

Just been re dedecorating in my mums house pulled the switches off to remove the wall paper and found this. I know the switch wire is flex so obviously will be replacing this. However, what concerns me is the green cable twisted with the live this disappears through the back box into...

Agree with breezer about turn and run like the wind !

Cheers for the info. Just seen the google ad my defence is it was late when I was looking at the post :oops:

Breezer looks like a good unit from the price a few questions though. What size HDD will it take / does it come with USB / CD retrieval facility Frame rate against storage capacity You seem to mention cameras but I can't see a link to those Does it have RGB connectivity or just BNC Got...

As breezer said if the documentation says sounder on circuit 8 they are just using the tamper terminals of zone 8. My guess is you took this off the wall to stope the noise, put that back on properly making sure you close the tamper switch and the 8 should disappear

No worries. Phil was it definitely an 8 not prefixed by anything like an s was it ?

As a security/fire engineer I often get domestic installs for mates or family. As far as Part P goes where do I stand on supplying power for the alarm system/cameras etc. Can I connect a spur from a ring main, wire directly from the Cu on a spare way ? 2nd question may sound daft but as kitchens...

It's LV but hey ho no worries. If the 8 appeared then you prob find you got something connected to zone 8 my guess would be a door contact try shutting all internal and external doors see if the 8 disappears.

You may be able to get a manual off the internet but my point is unless you know what your doing it's not much use. To be fair the panel may be f***ed anyway they don't have much of a rep for reliability.

Lt = Lid tamper the lid of the big white box is not fixed correctly. If you look at the top of the box you'll see a thin piece of metal and a microswitch this switch needs to be closed rr= installer reset required. This depends on who installed the system and if the code is still default need...

After deciphering your message I think the problem you've got is that the panel has defaulted. Do you have any manuals for the control panel ? Sounds like it needs to be reprogrammed. Do you have anything connected to zones 7 and 8 ? If so what ?

Disconnect the bell first as soon as you remove the bell cover the bell should activate. Then disconnect the intrernal battery. You can then disconnect the mains and battery. MAy be worth changing the external siren at the same time