Search results

I see stevie wonder plumbing is still going strong !

Well it can't be fitted without the instructions. I presume this is a 2nd hand cooker?

im gonna guess its the earlier one given the age and the fact that the DV is so expensive. Its a rebranded hermann supermicra and the dv is an absolute s*d to change, easy 2-3hrs for the uninitiated

Also check your lease as to what rights you have over the stairs or what it says about it. Freeholder or not, she's effectively fitting a boiler in a public space. Although if you say the old boiler was in the same place, whats changed?

so are you a tenant or a leaseholder? I think as someone suggested earlier it could contravene fire regs. A visit from building control may be interesting...

surely stair well is a communal space owned by the freeholder? how on earth would that be allowed? Im sure there must be more to this story.

im a little bit confused as to whats blocking what and how

you should have a timer or programmer somewhere. also you need to top up the pressure its on 0

corroded/damaged/incorrect flue affecting combustion is ID. What you are referring to is assuming everything else with the boiler is ok and a bad reading. Love it when someone complains because you've just discovered they have a dangerous appliance. You'd think they might actually be grateful...

I dont know why anyone waste time arguing with drivel. Everyone can see he's talking cr*p just ignore him, he'll get banned and disappear anyway. The cycled has gone on for 10yrs now :P

Dr Drivel has so much time on his hands he regularly has 2-3hr showers at 20l/min therefore requiring a high powered combi. Unfortunately he has failed to realise the rest of society have better things to do and therefore do not require such things

the first guy was probably just not qualified for LPG and wasnt allowed to connect it. Hose should have a red line down it.

They are all a waste of time. A water softener is the only thing that works effectively.

yes of course im wrong I only work with them every day ffs and know them inside out. What a complete tool you are. Im not getting involved in an argument just providing some FACTS. zoning is irrelevant, its about resistance in the circuit. After the heat exchanger there is no available head...

yes it does. regards, atag service agent.

you should probably use some solder to prevent any leaks

as above make sure the boiler thermostat is set to max and your store thermostat isnt too high. if all thats ok then it will be the delay pcb

http://www.glow-worm.co.uk/stepone/data/downloads_sd/6c/00/00/hxi_range.pdf

no not usually. as long as there is good access from below the boiler right to the back then it can be done from below

they probably already know the store pump needs changing but just bumping it along as its a pig of a job. not uncommon practice for these insurance companies. I can do it in an hour or so but I have done dozens, i would imagine first time they will need a few hours. Also will require very good...