Search results

Mechanical strength or current carrying capacity? Personally I use approved alarm cable 8 core. If you had an excessive length you could then double up on the cores. Metering the cables after 1 St fix would indicate if this was the case. Not sure about mechanical strength I tend to fix my...

Display is correct as he is in engineering so pushing keys won't set it. Still worth updating though.

Sounds like it's in engineering. Press 0 lots of times till you get to Un. Then try setting

Times I have been grateful for the extra cores for various reasons.....

Bit late on this one but if u use tag then need to switch of flexiset for that user and allocate it to one area. Yes it needs it's own user location.

The lid cover is just a lid cover simple as that!

Simple really. If you are happy to look after your own system fit the yale. Drawback is you are very unlikely to receive professional advice on a yale system because no professional installer fits or recommends them. They may be grade 2 but I would not use them as in my opinion they belong in...

What lid exactly??? And what happens exactly???

You need to access the installer menu and it's panel options piezo siren on or off

There are two buttons above the keypad. The one on the right if you repeatedly press will step back through the events in your memory. Usually marked OK or with an enter arrow depending which version you have.

There is I believe a comms block which will give you the output you need. Or use bell output.

No that's kind of the point that you cannot instantly silence them.

Piccy shows stranded as it should be. Don't think I caught that post.

Yuk

K it's toolstation just search alarm cable

http://www.toolstation.com/shop/Electrical/d190/Cable/sd2730/Alarm+Cable/p685 I would normally say use 8 core but with so few wired devices 6 would be fine if your careful with your cables

Mc1 is a bit smaller. The mc2 allows the magnet to be in a couple of different positions and also has an input to wire another (non powered) device. Such as another standard door contact.

Never quite got the purpose of the power input as it still protested if the battery was missing. Did it actually charge it?

He means if you are going for GSM cheaper to buy equipped already than upgrade later

Yes sorry tamper for bell takes one input