Search results

Yes as you have said extensions will be wired downstream of the faceplate filter hence it would be split and filtered already (assuming it has been done correctly) anyway worst case scenario you may have to fit a filter but doubtful :-).

Think you may be getting your digital and analogue cameras confused Sally2000. Half decent analogue cameras can be 800TVL plus (television lines) High definition cameras come in the 1080P Variety which relates more to the pixels i.e 1920 x 1080-pixel resolution, or 2.1 megapixels

Think this thread has got a bit confused. Is the Hallway socket live ? If you plugged a phone in will it work? If so just connect directly on to this from your alarm dialler. If you have BT infinity you do not need a filter however if you are on their standard broadband then a filter will be...

Battery - I still have a module flashing after 8 years sitting on the shelf in my shed!

Do you mean Standalone IP Cameras ? Or connected to a NVR ?

Hi, The delta bell wireless tamper switch is not the same, it is incorporated in to the wireless bell module itself. It should be learnt after fitting it in position and would not trigger until the cover is successfully closed and then opened. This way you can test you have a good fit with the...

Found a nice article that goes some way to explaining what occurs inside an led downlghter especially when dimming. http://www.ledsmagazine.com/articles/print/volume-9/issue-6/features/understand-triac-dimmer-issues-to-ensure-compatibility-magazine.html The application i have is a pelmet with 6...

The Driver is a PowerPax UK LPF-60D-12 60W 12V 5A Single Output Switching LED Dimmable Driver On closer inspection of the PDF you are quite correct this is constant current and my led`s are Samsung 12v ac/dc dimmable ie rectifier built in. Think i have been given some duff information by the...

Hi, Stillp: 1-10v refers to the dimming range. Grounding/shorting switches the output off. Lectrician: powerpax driver and Samsung dimmable mr16. If I realised the minefield I was getting in to then I would have been more careful. However information on the subject seems quite scarce. I...

Hi, No the led driver has an input for dimming which is 1 - 10v. Not using this yet but basically using it as a switch if you short it then the output for the led is on, disconnect it for off. You can use a special dimmer to achieve dimming of the lights by varying the voltage on the input...

Hi, I have an odd problem with Led lighting and would appreciate if anyone had a theory on what i am doing wrong (nearly said can someone shed any light on this!). I have 6 off 12v MR16 7W LED lights wired in a pelmet with a maximum cable run of approximately 6 feet using 1.0mm T+E. The...

May be right as i was in two minds about where to post but electrics seemed to deal more with mains voltage items/issues however will give it a try if no luck.

Hi, I have an odd problem with Led lighting and would appreciate if anyone had a theory on what i am doing wrong (nearly said can someone shed any light on this!). I have 6 off 12v MR16 7W LED lights wired in a pelmet with a maximum cable run of approximately 6 feet using 1.0mm T+E. The...