Search results

Does that not depend on fault levels?

I can't see any pics, Bussmann is a manufacturer, it is only a knockoff of a Bussmann product if it is carrying the Bussmann name without their permission.

The other switch sounds like it is/was part of a two way lighting setup.

What wattage are they? If you include lamps then a 100VA transformer may be undersized. As others have said, send them back to the US and buy something suitable for the UK.

Do you have new tyres?

Wether or not it will work will probably depend on what your DVR VGA is outputting, the lead you link to has a note at the bottom of the description regarding this. Composite video isn't usually included in a VGA port, it usually separates RGB and Horizontal + Vertical syncs. For £2.60 I can't...

I think wether or not it is notifiable depends where you live, which country are you in?

That is for heavy duty pyro, is your's 2H6? Light duty usually has an L between the no of cores and size, I'm not 100% sure if they do 6mm in light tho.

It sounds more like a SMART error than a RAID one, sometimes you can turn off SMART in the BIOS. (Got to love all those acronyms!)

You can buy 110v-240v transformers, the one I have is blue. The output of it is electrically separate, like a shaver socket. As for the extension getting robbed, two options I can see are to have the inlet inside or put a staple (from a hasp and staple) on the outside and put a padlock on it...

did he turn the clock so the light for off peak came on before checking for power on the bottom heater? You can only have power to one heater at a time.

Please let us know how your bro gets on

The next two steps would be to isolate the supply, disconnect and check the resistances of the immersion heater electrodes to see if they are closed circuit (and check if there is a safety cutout that has tripped). If the safety cutouts haven't tripped, followed by checking if there is a supply...

The supply must be getting to the switch as the lights work (and the clock is ticking). Do you have a multimeter?

In an upshot, yes! You wouldn't want to be trying to enter the container with it at 230v wrt mother earth!!

Is it a twin immersion heater setup? For the sparks, there is a copy of the internals diagram here: https://www.tlc-direct.co.uk/Technical/DataSheets/Horstmann/E7Q_I.PDF

The supply shouldn't be T&E, even on a catenary. It is not suitable for installation in direct sunlight, nor where there may be movement. The cable may degrade and is attached to a supposedly metal catenary wire, personally if they refuse to change it I'd run a mile!!

Boiler as in an immersion heater? Is the clock ticking around?

There will be spring clips holding the lot up, but to access the lamp the bottom of it probably just unscrews. I'm not sure if it unscrews clockwise or counter clockwise tho.

If you have access to the consumer unit why not run the doorbell off a lighting circuit?