Search results

If you can get the cartridge out, count the number of splines on the cartridge end e.g. 18-20 or 20-24, it helps to remove it because they are two sizes/ measurements in the overall length and by getting it out you then know you that you can remove it, easier said than done with some taps Go to...

John d Wooden floors in main house and concrete floor in single storey extension at the front of the house Not sure about water meter Will check on slope of garden,which way and also check where down pipes discharge The large objects in the garden are rocks for decoration I asked about next...

Hi john The damp is not in the kitchen which is at the rear of the property Not sure where the incoming mains is but the damp patches are at each corner and the deviding wall at ground level and in the bedrooms above

This is a mates house and he has a damp problem It's ex council stock,the bit at the front is an extension. Not sure when it was rendered but has been painted in the last 4 years ,( externally) The gable on the l/ h side of the front door has 3 bricks high to doc but the front wall on the...

How did you get on Andy?

For some reason I thought you had posted in there, sorry Andy Might mean a phone call to burton tomorrow

Andy might be better asking in the CC where fellows like Ecowarrior might be around to offer some advice

Yes it is bud Each size of pipe work has a limit to the number and size of rads it can heat Is there any way some of the pipe work can be replaced with 15 mm pipe?

There is a similar alternative available at Toolstation which screws into the body of the(shorter)radiator I like them as they do not rely on the rubber seal and they do not look too shabby when in place, I seal them with Ptfe tape Item number varies as they are offered in different lengths...

The tails can be connected at the bottom Foxhole

Not sure if this will help in this situation or not but I have been told by others on here and by a Ferroli agent that with this group of boilers if swopping one thermistor you must swop both Don't know why, possibly something to do with the Pcb They must be Ferroli parts as well, not oem ones