Search results

Cheers Ianmcd. Yes I all ready have the Hub from the old address just need the thermostat and receiver for heating and hot water.

Thank you flameport. I have a look for the wiring centre and maybe I could then ask for some installation advice Pete

Good evening, We have just moved and the house has two controllers for the heating system. The boiler is a Worcester Bosch Greenstar 30CDI. - Old but appears in good order with service history. The controllers / Program are: Drayton lifestyle and a Salus RT500 If possible I would like to have a...

Thank you Freddie, I have another look and probably give them a call. I was using a mobile to look so that might explain why

You make good points, thanks. Setting the blade depth to the thickness of the laminate and yes to reuse the removed laminate are my thoughts to start with. As for services, I’m not 100% but I will make every attempt to check .

Had a look at Lathams but it was not clear if the door came with a door frame, locking system etc. Looking at GRP Doors site it’s very comprehensive showing all the accessories and costs. That said, I did like Latham steel doors for the security as you point out.

We need a new external back door. Had a look on line and had a read about GRP doors and would welcome the views on what to look for and what to avoid. Any recommendations would be appreciated . peter

Well, it’s an old blade and i might as well buy something suitable even if it’s only for this one off.

That’s what I was thinking. I appreciate your reply. I have a look and start with the max teeth at the least cost as this is, with luck, a one off.

I will need to cut a trap in already fitted laminate flooring. Can I ask what circular saw blade should I use. Will only be doing this once so I like to keep the blade cost to a minimum if possible. Thanks, Pete

Well, as you all have been so nice and interested, here’s the picture. I found out it’s a bonnet tile

Deleted

I also have and still do have a Potterton Profile and again 20yrs old. Has had a couple of services and 2 pcb . Started to kettle last year and I added a inhibitor to treat it. The boiler is now kettle free so that worked for us. Will soon start to look to update and replace the old girl as...

I didn’t read the link but just had a quick look. 19 pages, yes 19. I’m very impressed

Does sounds like the 3 port valve. You could drain/use hot water to get the boiler to fire up thus heating the rads also, to keep warm until you sort it. Another option is also to close in the balance valve ( only open 1/2 a turn )on the cylinder. This will keep the boiler firing thus heating...

Thames will always have a customer contact number when you report a problem and you should always ask for it. This number will Date/Time stamp your call and problem. It’s your ongoing reference point and will stay on their system for both you and Thames. Have it read back to you at the end of...

Mid position 3 port valve, synchronous motor

Interesting, made me go and have a look. RCD 80A 30mA

Repost in Plumbing and Heating for great advice

Thanks Harry, i never considered box construction but will now.