Search results

dont know if you have had a reply from philips but could indicate tv is intrip mode ie a short has occured and closed down the power supply or settings on philips crt's (the beam current) was a very critical setting backing off a touch may cure

Thanks Tim worked fine

Running xp, have configured dial up to start as soon as browser IE opens. Would it be possible to manually add to the start menu IE .exe command so the browser automatically starts when pc boots up.I have had this happen when I have had a pesky virus/malware on board but of course could not...

Bearings are shot bearings required and possibly new inner drum usually the most expensive repair and longest labour time try to get an estimate.

Cabinet Front off for access heater is at the bottom centre of the outer tub. will have three connections L. N. E. they may be individual spade conns or a push on plug. continuity check thro L. N. you will probably find open circuit. Unscrew centre nut in the middle of the heater base this...

Any white goods tech will tell you that he would rather work on a washing machine anytime rather than a tumble dryer. Drum belts are rarely easy to fit and some machines require a special manufacturers too l to fit.

ok as promised feedback after cleaning and drying filter just had the designated person of the household do the hoovering today and interrogated after said event, outcome yes better than previous but not a patch on what it was like when new. Still will stick to my previous comments dysons...

yes its the filter to right of the machine released by the the blue catch and the sponge filter is enapsulated in a round plastic housing. The model is a DC07 I have just disassembled it and cleaned it again and will refit when dried and post you with the results.

I think this is a dyson thing the same happened to ours when new actually lifted the carpets the suction was so good but after a year or so its rubbish.The filter was not the problem and most people I have spoken to have found the same. Maybe a dyson or vacuum cleaner Tech may like to give us an...

Usually thermostats are an integral part of the heating element. It comes complete when heater is replaced not a common fault though to overheat

I assume there are no, lights on the machine if so possibilities are on/off switch open circuit or more probable pcb (printed circuit board) blown. There is usually areason for this either motor or door interlock have flashed over and blown pcb.

Yes the thinking is now that it is more energy efficient to have the washing machine heat the water to temperature in the drum than pre heating the water, bearing in mind the combi boiler is the norm for heating which heats water as it is drawn.Of course in your case it is the opposite the hot...

The fault you have is convergance were the red/blue/green outputs are not converging on the screen correctly. Have a look in the manual it may be just convergance correction alignment via remote control

you have been unlucky Toshiba one of the more reliable manufacturers however from your description not a twiddle solution sounds like (if you have not had any spillage down the back) like chip failure not a diy job unfortunatly

There should be no backround noise on a digital radio. If the hum/buzz does not increase with volume then it is probabley mains hum it will be a mains component in the power supply within the radio choke/transformeer etc. or possibly poor earthing connection in the radio but not the extension...

I have not duplicated a reply it was just that myself and sleepyhead were posting replies at the same time

It will not ruin your machine but may ruin the clothes being washed. If she is washing delicates on a 30/40 degree programme and hotter water is coming into the machine then she may find she will have to loose five stone and three feet in size to fit into them again.Hot water also will cause an...

There is no adjustment on a freeview box for contrast colour brightness etc The only adjustment I know of is on a skybox with preset contrast levels.There is no fine tuning either as it is connected via a scart input. If your other scart imputs are ok your dvd or video recorder that would...

Tops are a bit tight if screws are out at back and there is no side screws then face the machine and hit and push forward at the same time quite hard with both open palms of the hand striking the top at the top front not the front edge with the bottom of your palms.

first check make sure the rinse hold option has not been selected