Search results

Really? I can't see a way to get to the screw that was on your video

Yes I took a photo

Thank you but my hinges aren't like that

I have a gap down the left of my front door as of the door is leaning from right to left, there's a gap at the top left of the door too. I've attached pics of the door and the hinges. I've tried loosening the screws on the top hinges and pushing the door back into the hinge but it hasn't really...

I couldn't figure out how it came apart, I have contacted Kenwood and it's not one of there's it's an after market connector

Sorry I should have said that's before I broke it I thought it would be easier to identify if I showed the whole thing.

I've had my Kenwood radio repaired recently, whilst trying to remove it too send away I damaged one of the connectors, does anyone have any idea where I could get one please. Thanks Bill

Any idea what could be causing the staining?

I would just add that I am using a roller, I've tried both foam and the other type of it possible I'm rolling too much?

I looked at the different ones available and thought that bullseye 123 would be good as it's a primer sealer and stain blocker, it's ok but I've put 3 coats on each door now and although it's improving I can still see the colour of the door in places. I've attached a pic I have no idea what I'm...

Thanks for the reply, so does that mean sanding then all down again and basically starting again with undercoat and then to coat? When you say use zissner bin does that do away with the need for an undercoat? And what do you mean " don't worry about opacity" ?

I have decided to try to renovate my internal doors which I've shown a pic of. I sanded them down and was advised that if I painted with 2 coats of satin wood paint it wasn't necessary to use undercoat? I went for a water based paint because it dries quite quickly (5 hrs rather than quite a bit...

So I can actually cut the doors down to the size I need , but I would presumably need to cut from both sides?

Hi all have 6 doors that I want to replace but they're all different sizes all same height but very different widths from 715,720,760,770,770 to 810 . My question is can I trim panel doors down ? According to the label on the doors at my local hardware store you can only trim about 10mm from the...

No

Really appreciate all the help from you guys

Hopefully a clearer pic of switch

The black wire RHS of switch is powered regardless of switch position so permanent live?

When I say rose I mean the wires in the ceiling I thought rise was easier than having to say that every time

The porch light and landing light work ok