Search results

Hi Eggplant, Thanks for the response. I'm sorry I probably didn't give enough info in my original post, the server (application server) is already within a domain which has two domain controllers, the access to the C:\ is restricted using Active Directories. (I have tried to relocate...

In the company I work for we do not allow users to access their C:\ as a security measure. The problem with this is it means they cannot access their Favorites. I am attempting to create a .reg file which moves the location of their Favorites to a shared location on a server. I have...

You know the way you see Oak Trees cut right back to just the trunk and all the major branches are all lopped, can I do the same with a Maple? I'm aware that Maples 'bleed' so am I right in thinking it should be done after new growth in or around mid summer? The Maples about 20 years old...

I'm experiencing problems with the heating/ventilation system on the above car. There appears to be no power to it? The a/c light is out and when you turn the blower dial or heat dial nothing happens? I've been through all the fuses and cannot find a blown one? Can anybody help? (Please...

Thanks for the response Diyisfun, but I've already been through most of the sites Google kicks up, and the two URL's you provide do not link to an element that will fit my perticular model. The one you've found is a triple ring 2500w element. The one I need is a double ring 2100w element, and...

I have been looking for a cooker element to replace the blown circular fan element from a Baumatic BT2760SS. I can get one directly from Baumatic but will be paying top dollar for that. The actual element is made by EGO and carries the part No. 20.40655.000. Anyone know where you can get...

Ahh I wondered if that's all it was, drained that before I replaced the fuel filter and fuel came out straight away. That's why I was unsure if I'd done it right?, considering the fuel filter hadn't been replaced for some 30-40k miles!! Thanks for you help.

I have a Peugeot Hdi 2.0 and have just serviced it (changed the oil/filter air filter, fuel filter) but in the servicing schedule it refers to bleeding the fuel filter of any water. Can anybody tell me how this is done? Thanks.

Great news, thanks so much for your prompt reply.

I wish to install a ceiling light in a new cloakroom I'm fitting under the stairs. The problem is that the lighting circuit is quite far away. Am I able to run a spur off the ring main with a fused pull cord switch to a ceiling light? If so can I use any standard light fitting? Please...

Tom, don't you think that's a little unfair? I'm not talking about ripping out the windows and replacing them with UPVC characterless frames, I'm trying to retain the original look whilst making the windows more practical. As for the rippled glass you mention, that's what I've already got in...

I think a lot of the character of the House comes from the original windows, so I'd want them replaced like for like. To get someone to make copies would cost a lot (in my opinion), but to get someone to make up a number of double glazed units which I would then put into the existing frames...

Yes, sorry if I caused any confusion, I did mean to replace the glass only leaving all of the original woodwork intact. The stepped units sound quite good. But to try and cut costs (assuming stepped units would cost more?) I was wondering if as long as I leave a decent amount of frame, could...

On the front of my house I have a fairly large bay which houses some very nice georgian wooden framed single glazed windows. They are the originals and the glass is all a bit old and warped, but the frames are sound. I was wondering if it is possible to put double glazing into the existing...

I have a 1930's house which is predominantly rendered with a 12 (ish) course exposed brick level at the bottom. My problem is that a number of these bricks have 'blown'. I suspect the pointing has deteriorated over the years, never replaced and damp has gotten into the bricks, frozen and...

Thanks for all your suggestions and advice. I have decided to purchase on of these. Video Game Jockey If you are at all interested I'll let you know how good it is? I can then use a digisender for the sky, the DVD can be plugged directly into the VGJ and I can finally turn my Garage into...

Have you tried searching the registry for the offending URL?

I am trying to work out the cheapest method of connecting my DLP (Projector) to either my DVD player or SKY Digibox (both can be set to RGB out). I can get a TV PCI card for around 30 squid, and then tune this into either of the above, but I suspect this may cause picture quality...

Would I be able to use something like this http://www.fernco.com/TS.html ? If so, how would I cut the hole in the cast iron pipe? Thanks.

The Background: I intend to install a downstairs toilet under my stairs. To do this i'll obviously need to tap into the soil pipe. the upstairs toilet soil pipe (cast iron) runs down the wall right outside of where I intend to install the new lav. My questions: Can I cut and attach a...