Search results

Your supply should be installed by a WIAPS plumber who will issue you and the water supplier with a certificate to say it has been installed to the regs.. You are allowed to install it yourself but in this case it will need to be inspected by your water supplier. Andy.

To comply with the water regs you also need to install a drain valve just after the stop tap. Andy.

Do you know where the stop tap is :?: Andy.

Probably better off not opening it at this stage, it's not the newest of fittings.

I would recommend fitting an original part. Don't restrict the flow. Andy.

I am watching you...... :twisted: Common fault on these boilers. Andy.

I guess it's a worcester :?: Think full bore. Andy.

There is bung style adaptor that converts your 21.5mm condensate to 32mm. Your local plumbing merchants should have one. While you are at it I would recommend to go to 40mm, this is if you can't find a way to go internally which would be far better. Andy :)

http://www.diynot.com/forums/viewtopic.php?t=175736 Andy :D

:?:

Have you considered fitting an external expansion vessel :?: Andy.

You could start by measuring how many litres per minute your mains water is. Bucket and stopwatch time. Andy

Vaillant ecoTec is my boiler of choice. More important is who does the installation. Andy :D

Thats sounds like the one.

Does the heating side work ok :?:

Possibly the diverter valve. Andy.

Your first post would indicate to me that your ev is faulty. Water out of the ev valve. No where for the expansion to happen so out of the prv. Pump change. Not sure. Maybe repressurising the ev has given you some time. Only for your original problem to re appear. Time and how bad your...

Have you got the instruction book for 'installation and servicing' :?: Andy.

I think 11 on the dial is a bit much. Fill to 1 bar. The instructions will tell you what the other buttons are for. You should know what they do because when you fill this boiler there is a procedure to follow which will need you to use the menus. If you don't your boiler will be full...

If you press the minus button the bar pressure will be displayed. Andy.