Search results

whys that then is it just a better primer?

got this shower tray that sits straight onto the floor and the trap and pipework goes into the void under the floor just curious as to fixing this is it still a case of using marine ply and bedding it down with sand and cement#?

is it some kind of weapon lol if you came towards me with the glove on and the hook in ur hand id be a bit nervous!!!

well u got to make sure its not solvent welded for a start and fairy liquid rots the seals you can use silicone grease but its doubtfull it will penetrate into the jointwithout any movement

you should be able to fix through the existing plasterboard through to the existing joists make a hole the one end of the room through the plasterboard to locate the joists mark them with a pencil on the ceiling then do the same the other end of the room then use a chalk line to mark the line...

youve got a partial blockage either in the stack or between the stack and the bath

yea just make sure you fix into the joists

a new laminate threshold cover will go over them just fix it down with some sealant

thought u only had to balance rads on a one pipe system?

Hi ive recently replaced an old panel radiator which worked fine for a new double convector radiator ive fitted lockshield valves to either side of the rad but the one is a drain valve also. the problem is the new radiator worked fine once i bled the system and after a couple of days the...

unfortunatley its a lose lose sitaution your never going to please everybody when you invade places like iraq and afghanistan but you cant just sit there and let people get away with what happened on 9/11 with the likes of bin laden. By no means is it good that our boys and girls are in these...

fill the system to just over 1 bar because most boilers wont work if its under one bar pressure have an automatic cut off this should sort the problem of the central heating but the reason for the water trickling out of your taps if it didnt do it before would indicate a partial blockage more...

fill the system back upto just over 1 bar and let it circulate and the air should find its way out either through the auto air vent or at the top of the rads then bleed them

What do people think of the cold bitumen adhesive is it good stuff, will it last? never used hot bitumen before so dont really want to try it either!

i havent quoted yet lol

Any ideas how much labour only to fit 10 TRVs to rads in midlands area

it still makes the noise with the inserts in

This is a bit of strange one! In the livingroom is a large radiator, aprox 1800 x400 double convector it is fixed to the plasterboard with 3 brackets and has always worked fine, we took the radiator off recently to have the wall plastered and when we refitted the rad ther is a knocking...

well if its going to be 750 deep then surely im gonna have to go under the foundations

if I take the pipework under the foundations with a shovels width trench 750 deep will that be ok will it effect the foundations?