Search results

Most fit Navien which isn't too bad

We live and learn

It seems like the valve to the left is closed? It needs opening with a spanner/wrench, turn it all the way anticlockwise

Hello, I have two wall-mounted 2kW panel heaters in my apartment. One in the living room and one in the bedroom. They are both fed from a 16-amp radial circuit, each with their own fused spur (13A). There is nothing else on the 16A circuit. I have a split load consumer unit with two RCCBs for...

Hi, I have been tasked with installing 4x 6 ohm (10w) speakers to an existing 100v line public address system. The amplifier is rated at 240W and currently the load is 175W. Adding these speakers (4x 10W= 40W) will bring the load up to 215W, so within the limit. I have a few 100v transformers...

Did you find out the problem

Thank you for your advice.

Thanks I don't think it's that though

See photo thanks

Yes

Thanks for your reply! I want to balance the system

Hi on my upstairs rad the valves are round and not square so I can't adjust/isolate them. Have you come across these and how can I isolate the rad please. I'm not talking about the bleed valve. I mean the flow and return valve. It's a Combi system. Thank you! Matthew

Hello! I have a Worcester 28i RSF non-condensing combi boiler. I am installing a room thermostat to be used with it. What central heating temperature would you recommend I leave the boiler at considering I will have the room thermostat set to 19°C? Thank you!