Search results

hi guys!, Can anyone help me out here, i want to remove Mcafee from my system and install norton but when i try to uninstall mcafee from add/remove list on control panel i get error message 'Internet explorer script error' do i wish carry on runing scrips on this page 'yes' or 'no' click yes...

the flexy hoses that come out of my sink tap has a 10mm nut at the end?, the problem is that it will ot fit on my plumbing, is there such a thing as a 15 to 10 mm compression valve??

hi guys, my plasterer has managed to plaster over the edges of my upvc window frame, now its dried how do i get it off with out scratching the plastic frame??

this because you do alot of 30 and 40 washes and probably over dosing, (one tablet is enough in modern machines] not all powder dissolves at this temp and it rots in your drum... i would replace the door seal, clean behind it which harbours and lot of smell, then run lots of 90 degree washes...

i need to install and extraction fan above my shower bath its a water-mains shower not electric, im thinking to wire it from the light pull switch to a double pole pull switch and then to the fan. would this be correct as far as regs go? do i need a triple pole islator out side the...

hi, how many 100W lights can i run on a 1.5 6A radial circuit, thanks

yes thats it, just pull it, it will come out

not to sure of what seal you mean? but would you describe it as looking like a black rubber donut? which fits into the sump ? if so just pull it with a big pair of pliers it is tight.

im going to put in new smoke detectors, one down stairs landing and one up stairs, i thinking from a 6A mcb with 1.5 twin&e to 1st smoke then 3core to 2nd would that comply with the regs? also what detector would be recommended ? or dose that not matter

tricky to explan..mmm.. ok, if look at the motor from the side panel you ll see that it fits into a white motor pump housing at the 2 o'clock position there is raised piece that stops you from twisting the motor off, that bit that is raised need to be pressed in then the motor will come off, you...

thank you pchelpman, i will give that ago and let you know how i get on

oh right thanks spark123

oh right, where do i get this adaware?

hi, im running windows xp sp2 each time i launch explorer i get a pop up (casinos or dating) then again about every 5 mins, i have run spybot, windows defender clean disk cookies and set the pop up blocker to highest setting but still no luck, how do i get rid of this? or is it a restore job...

yes bosch, siemens, neff and gaggenau are all of the B/S/H group, what do mean by load sensor? do you mean aqua sensor? the aqua sensor is a photo cell which looks thu a sample of water to see how clean or dirty it is and adjusts the wash time accordingly but only on the auto program setting...

most extractor fans come with a moulded plug and if a bulb blows it sometimes takes the fuse with it normally the closest one, i would check if there is a plug some where either above your units or in the flu its self, replace that fuse...

yep if the pump runs but nothing else will work the base is full of water, to prove this just tip the machine back and if water runs out there's your anwser, most common causes of a leak on this model is motor seal, fill valve, pressure chamber seals, also make sure the sump hose isnt...

i just thought that it was good practise the bond the bathroom light and pull switch fittings

the gas pipe dosnt enter the bathroom at any point, it just runs across the loft to the boiler, it is bonded at main earthing terminal at the CU.

thanks for advise guys, also is it ok to bond the bathroom pull switch and light to the gas pipe which is in the loft above??