Search results

  1. A

    HE30 Seal Identification

    The final HE30 issue to resolve is a pressure based leak from the seal above the part located in red. I'm unsure which is the seal as I don't recall it having the clip which would make it part 6. Possibly it's the unlabeled pipe in the top left! Any idea on the name of the pipe, which would...
  2. A

    Ideal HE30 Gas Valve Voltage (E/F Error)

    Just want to double check, on a boiler which won't reset clear the voltage to the gas valve measures 108V DC, with 240AC (which may be residue). The manual states it should be 200V, others say 150V is fine. Is 108V not fine? The boiler immediately faults which leads me to believe PCB. There's...
  3. A

    Isar HE30 -> Sporadic E/F

    I've got a hateful HE30, which is probably on it's way out. I'm now getting an E/F error. The boiler comes on and seems to try and ignite three times (lots of relay clickings, fan up/down). Finally if it doesn't ignite the error code shows. Occasionally it will ignite and there's a concerning...
  4. A

    Ideal HE30 Boiler Leak Diagnosis

    I'm not one of them, I was unimpressed with the workmanship and can see it being problematic down the road. New boiler time!
  5. A

    Ideal HE30 Boiler Leak Diagnosis

    On inspection, it appears to be leaking from everywhere! The two heat transfer seals are gone, and there's another leak somewhere up a height behind the boiler top bit.
  6. A

    Ideal HE30 Boiler Leak Diagnosis

    Ah re-read, so 4mm allen bolts underneath the heat exchanger, not the pump.
  7. A

    Ideal HE30 Boiler Leak Diagnosis

    Just to confirm, you say "lift the plated hx up", which is the copper looking piece to the left of the pump. I take it this has to be disconnected somehow (the four allen bolts are just for the pump head?)
  8. A

    Ideal HE30 Boiler Leak Diagnosis

    Absolutely brilliant, sounds like it's going to be a busy morning! Thanks! Andrew
  9. A

    Ideal HE30 Boiler Leak Diagnosis

    A Gas Safe Registered Engineer, so says the sticker.
  10. A

    Ideal HE30 Boiler Leak Diagnosis

    It was serviced a year ago. :) Can't see the actual leak, so I figure the heat plate will need removing.
  11. A

    Ideal HE30 Boiler Leak Diagnosis

    Thanks will try the bolts first. The HX seals, is it a big job?
  12. A

    Ideal HE30 Boiler Leak Diagnosis

    Hi all, Bought a property with a 'working' boiler. No issues other than a little weep which leads to pressure dropping over time. I'm reluctant to take parts out at this stage and was wondering if somebody with knowledge of this boiler an identify the leak from the pictures below. It looks...
View older results
Back
Top