Search results

It isn't wired up thats why I needed to ask on here.

Hello, I have a cooker extractor fan that I want to check but unsure of the wire orientation. There are 5, Black, Blue, Orange, Yellow and White. 1 must be Live? 1 must be Neutral? and the others the different speeds. Can anyone enlighten me? Cheers

Cheers When it comes out of the wall it must go round two internal corners to get to the vent pipe, total length of 3.5m

Hello Is there a limit to the amount of bends that you can have in a soil pipe (i.e 3 90 degree ones) before it gets to the vented pipe cheers

cheers :) whats the best mix for the mortar?

Hello When finishing a parapet with copings is it correct to put a DPM? cheers

I think your right, better get myself to the hire shop again for the hole cutter, thanks for your input

Yep it does have a toilet What about in-line back draught shutters at each extractor? or What about vents where the extractors are then a inline fan just before the vent outside?

Hello, can you help? I need to fit 2 extractors, one in an en-suite and the other in a utility, can I use one vent for both extractors as the drawing? Cheers [/img]

IDEAS

Thanks Julian for the reply Is Giddens made by Dulux? I seem to remember this from somewhere!!

Hello I'm planning on painting my hall, stairs and Landing above the dado rail in white. What type and make would you recommend I use? Or have an opinion? Cheers

Thanks for the replys The instructions for fitting the victorian coal fire are from http://www.victorianfires.co.uk/fitting_a_fireplace/cast_iron_insert_with_marble_mantel.html It has a seperate concrete fire back

Hello I'm fitting a cast iron insert to bare brick and have read that you can use bonding to do this. I have a bag of dri-wall adhesive going to waste and wondered what the difference/problems would be if I used this instead. Any thoughts on this would be a great help, cheers

Hello, I have an en-suite and a utility room next to each other and require an extractor for each of them. My question is can I have vents from the rooms both connected in to the same ducting and then have an in-line fan after the vents to pull the air to the outside (12-14 feet from the...

Hope some one can help me, i've been in touch with this company (link below) these are DIY flat roof windows. I need 10 of these of differing sizes http://www.angarch.com/slimglaze.asp the problem is they are 270 miles away and are quoting £700 for delivery. Does anyone know of...

Hi, I have the internet (although it is alot slower than it should be). The main problem is I have no tone on my phone. I can't ring out and no one can ring in. I tried a different master socket but there was no change. Could it be a problem at the exchange? If so, why do I still have...

Easy, took off the handles, wedged one side with a screw driver and tapped the other with a hammer and snap, cheers for the replys

Would like to make it self contained, it has a separate electric meter from the main house already, I think it was built in the 19th century when the house was built so no problem with any conditions. Is it mainly down to a change of usage?

I have a large garage/workshop it's about 13m x 6m, double height. I want to change it to living accommodation. I'm sure that someone has converted a similar thing further down the street, if so would it be easy to get the planning permission my my garage. Any knowledge/suggestions would...