Search results

judging by your pic no, unless you were planning on building a shed and needed a roof.

Have you thought about hiring a concrete planner?

Thanks again for your help, but i have already bought it. What would you recommend for cleaning maintenance?

Thanks for your advice i have no finished laying the floor, i can't get time to sand and finish it for 2 weeks or so. I have gone for bona mega for the finish as it's mahogany (was concerned with the pachyness with oil). I have also split the room in 2, using oak for the dining side. I...

could you post a pic of the damaged tiles?

A pic would be very helpful, but as already said you will have many more damaged and a re-roof will be the only real option.

they are bracing's mate, i wouldn't pull them off

i'm just a novice in this flooring lark, but when i was planning the expansion gap in my room, i hacked off the bottom 4 inches of plaster and screwed a batten at this height and just above where my flooring would be so i had 20mm plus the thickness of the skirting to work with. I did...

i have just done this with a 25m2 floor, and by far the quickest was to use a 'hook shave' and scrape the bitumen off, then plane 0.5 millimetres off the back so it was back to bare wood then sand the old varnish/filler off the edges using a bench sander. This took well over 60 hrs but the...

Just been reading a bit on the forum, and you mention priming the sub floor? The floor screed i'l be using is sealofloor. Thanks again.

Cut a new hatch where you can buy a ladder that will fit

Almost ready to start now, man do them blocks take some cleaning!! Another question for you, do you need to press in the blocks after laying? with a roller or something? Cheers.

i'd use a decent silicone sealant , that bitumen stuff is for bodgers!

You'd be better off relaying the whole lot with a step or 2, once lead has stretched enough to crack it has a tendancy to keep cracking. Call a roofer, leadwelder in for a quote, wont be cheap though. Another solution is laying a fibreglass flat roof there.

Thanks, I'll hire one for the job, bit pricey to buy !!

Thanks!! Just one more question, if i put a 2 block border around the room how do i do it? do i do it first and cut the blocks as i reach the border or is there another way?

hi mate, it will be self level floor screed over concrete

Hi, i have read quite a bit about parquet on here, and am about to install it myself at home, I have decided to use lecol 5500 as the adhesive and osmo polyx oil as the finish. My question is how do i set out to start? And i'm planning on putting a 2 block border around and main bit will...