Search results

  1. O

    Another hotpoint wf541 problem

    ive got the machine running in rinse and spin mode and its funtioning correctly, could this still be an incorrectly fitted connector or isit morelikely to be a faulty pcb??
  2. O

    Another hotpoint wf541 problem

    does the motor plug connect to the pcb??
  3. O

    Another hotpoint wf541 problem

    right my new pcb turned up today which i fitted this evening, but the machine still doesnt work correctly. it begins a cycle but after a short time the power light flashes rapidly and the rinse hold (3rd down on the left) flashes slowly any ideas ??
  4. O

    Another hotpoint wf541 problem

    cool, thank you very much for your help, i will be contacting them first thing in the morning
  5. O

    Another hotpoint wf541 problem

    do these modules need programming or are they plug and play ??
  6. O

    Another hotpoint wf541 problem

    this is the item that is to fault, i assume its a common fault http://www.emwelec.co.uk/index.php?action=item&id=217&prevaction=category&previd=2&prevstart=0
  7. O

    Another hotpoint wf541 problem

    right ive sripped the machine and found the main control board/module has some burnt out resistors and lots of smoke marks. I assume these arent repairable so where would i find one
  8. O

    Another hotpoint wf541 problem

    every light on the front apart from the start/cancel light
  9. O

    Another hotpoint wf541 problem

    hi, ive had the washing machine for about 2-3years and about 18months ago i had an issue where if i turned the washing machine on every light in the front pannel would flash, sometimes it would stop flashing and allow me to use the machine. So i decided just to leave the machine on, all was...
Back
Top