Search results

Hi, just moved into a house which has an outside PIR light that doesn't work. I have tested the lamp by putting it into an internal spot set-up and it is working fine. The switch is located directly behind the light in the inside passage way. The switch is a two gang as the second switch works...

The battery is a brand new leisure battery showing 12.3 volts on the meter. The 240v electrics trip out at the charger mcb if I disconnect the terminal to put the meter into series. Paul

Hi, I have recently acquired an Abbey County 1997 caravan and have begun to test all the normal services before goiny on holiday. I have come across a couple of problems one of them being electrical. With 240v lead connected to van and powered up I cannot get any 12v power and I am...

The freezing method does work as I used ice cubes to harden the gum my child left on the back seat of my car and then scraped it off. It tok a while but it worked.

So if I match up the colours/numbers that I have wired into the box in the consrevatory with the same numbers in the master box then I only have to wire in numbers 2 & 5.What happens to the other two wires ?

I am having problems with my wireless internet connection strength so I am wanting to put a telephone extension on the outside of the house through to my conservatory where my PC is stationed. I plan to move the wireless router in to this area and hard wire connect my PC to the router. I have...

Hi, I have an A1 wired alarm system. The keypad stopped working last week. I was told it may need a new battery so yesterday I turned the elecricity off while I removed the battery. The electric was off for a couple of hours. When I turned the electricity back on the alarm went off. Obviously...

Hi, I have an A1 wired alarm system. The keypad stopped working last week. I was told it may need a new battery so yesterday I turned the elecricity off while I removed the battery. The electric was off for a couple of hours. When I turned the electricity back on the alarm went off...

Hi, I have a 8.5kw shower, 6mm cable and a 30A cartridge fuse. The fuse blows after approx tem minutes of shower use and gives off a very fishy smell at the fuse box. I have checked all the connections and they are OK. I have been told I really need a 45A fuse to allow full power to heat...

I have a 2 gang 2 way switch at the bottom of the stairs to work the upstairs and downstairs landing lights. I have a single 2 way switch at the top of the stairs to work the upstairs light. The problem I have is that I can turn the upstairs light on/off from the upstairs switch but not from...