Search results

Well they had sky installed to all the rooms (satelite cable in all rooms) i guess they did this because there was no aerial socket?? I'm planning to remove the sky dish and cables at some point as I dont need satelite TV, just freeview is enough. So you think its def a tv socket there...

I checked when the house was completely empty and no aerial socket. Even the loft only has 1 cable going out and seems to lead to the bedroom. I'll try look again but it's not in any obvious place.

anyone? just like some advice as I only want to do it once

Hi guys, Need some advice on my tv aerial setup in the new house. I'll be doing this all by myself but need some advice. Living room has no tv aerial socket so I need to patch it down to there somehow, I have a loft aerial and this only feeds into the tv aerial socket in the main...

i think i started this thread off very badly, forgive me as I was tired and working abroad and not doing the actual work till i'm back in a few days. ok so from the junction box, the cable (3 core) is too short to go to the first new fixture (has L/N/G) so rather than re-wire it (the wall is...

I was a bit confused because there's 3 cable going into the rose, then another ground and live into the bulb holder. Surely I take the connection where the 3 cables are and not from here the wire connects to the bulb holder. That was where I was confused.

It's already daisy chained with 1 switch. I'll leave the first rose and have 2 flex cables from the rose to the 2 new flourescent. The fixtures already have a neutral terminal on both, so guess I'll use the rose to connect like for like. I wasnt sure hence why I asked, I replaced all...

Hence why this forum was created :) I can retain the roses and run the 3 cables to the fluorescent from them both. Ah in hindsight I worded it wrong, let me try again. Current setup: from junction box, 1 cable go up and feeds into the first rose, this rose is too short to go to the...

Hi guys, In the garage I have what i believe is a 4 way junction box, on the ceiling there were 2 rose pendants which i'm removing and now installing 2 fluorescent lights. I havent wired them up yet as the existing cables are not long enough. I've bought longer 3 core cables. my quesiton...

I believe if I can fix something safely myself I will do it, this also saves money and I learn the in and outs of the problem. If it was a big job then I'll call in the pros of course. Thanks to Dan Robinson on here, I managed to fix my boiler problem saving loads money. It was the pcb...

Thought I updated, found out that a ground cable was loose when the program panel was being removed from the wall. Somehow this made the pump work again And the over run is working too. Strange.

So I guess my pump is knackered. Still doesn't explain why the pump overrun terminal is still showing 240 volts after 12 hours. Maybe my pcb faulty again? I just installed a new one 2 weeks ago

Just checked the over pump run terminal and it's still powered on even with the boiler off. Now it's kinda back to my original problem and the pump doesn't work now.

Hi guys, So my previous problem was the over run pump constantly running, the PCB was to blame and fitting a new one resolved this issue. http://www.diynot.com/forums/plumbing/heating-pump-constantly-on-y-plan-help-needed.314037/page-3 Now the heating pump doesnt work! power is going to...

Hi guys, So I think theres a problem with my kitchen radiator, it doesnt really get hot. Most of the others are nice and hot/warm, I've tried turning all rad valves off and leaving the kitchen one on but at best it was warm top and bottom, top slightly warmer. So thinking should I...

yes this is finished, its an 12 yr old house. not really working on the car as much, more like a gym and part time detailing the car + bike

Hi guys, I'm looking for opinions on lighting in my garage, this is to be used as a gym as well. pictures below, currently has 2 halogen lights which are not bright enough, I was thinking having 2 single flurescent light on each side following the joist rather than going across them. Or...

Hi guys, I'm looking for opinions on lighting in my garage, this is to be used as a gym as well. pictures below, currently has 2 halogen lights which are not bright enough, I was thinking having 2 single flurescent light on each side following the joist rather than going across them. Or...

thanks for that matt. This is now resolved! I suspected the reason why it was still running was the initial power up since i turned the power off. So left the central heating running then turned off, pump still on, after about 10-15mins (i didnt time it), the pump stopped. did another test...

Hi all, So I've wired the new pcb exactly like the current one, the old board had a bit which seems to burnt out as it's black on the back. Great I thought so changed to new board, powered on and went to check the voltage on terminal 4 and there's still power! I'm hoping this is just the...