Search results

The gap is only from the below handle downwards When you look at the top hinge you can see how it is further away than the rest, it looks to me as if part of the rubber/plastic on the hinge has worn away thus allowing the door to slightly tilt

The frame is perfectly level The door slopes down In the past the plates had to be dropped slightly to allow the door to lock correctly The hinges can't be adjusted to correct the drop (drop is only small but enough to cause the door not to seal correctly

Quick update Had a go today to see how hard or easy pins would come out Tried knocking up from bottom they wernt shifting so gave a whack from top and sure enough it stsrted to come out, well impressed So ordered the hinges today When you mention about bending door to get at screws...

Ok thanks for all the help / advice Ill order the hinges If i get stuck i know where to come hahaha Dont go far Hahahaha Kev

Top of hinge https://www.box.com/shared/754294afe18cec744b7c Bottom see allen key https://www.box.com/shared/054c9dbbfba2fc99e375 Do i need to remove alen key bit or is it that i knock up

I get your drift good idea There is 4 hinges already is this needed or can i just go for 3 Also these pins you say knock out upwards, ive looked underneath them and there is a allen key type hole, do i remove that aswell or is it that im knocking up and out (after removing grub scre)

Hahah. Thats what i thought, the screws are hidden impossible to remove So its gonna be a right Tw.t to do then ??? Is there an easy way once door is off and hinges screwed to it or is it a balancing act, door in one hand drill in other hahahaha

Ok so it is possible to remove 1 hinge at a time, like you say it will be a lot easier Do these butt hinges come off ok, is there an easy way to remove them Ill attach a picture of mine https://www.box.com/shared/9fc55df07ce5f2c24592

Brilliant I found this http://www.upvcplasticsurgery.co.uk/internetsales/how-to-measure-frame-to-sash-height.gif So you say replace 1 hinge at a time, do you mean leave door attached to frame with butt hinges and replace one hinge at a time, if so I didn't realise the hinges could be...

Crank39 cheers for the help Only thing that concerns me is the measurement of the sash I think I know what you mean Is it the distance between the door frame and to the face of the door, ie: measured mine and it's approx 19mm This hinge looks suitable allowing between 15-21...

Thanks for that The existing holes I'll cover with silicone So is it easy to remove hinges / door just I've not removed one before Is it basically remove all grab screws Remove all top of hinge covers Then door should lift off Please advise if possible, also which flag hinges...

Hi Is it possible to change the hinges on my door from butt to flag When the door is shut (handle lifted up) I have a visible gap running down the handle side of the door When it's windy you can feel the wind coming through I've tried adjusting the butt hinges but they won't adjust...

Glad to hear you alarm pretty much sorted When the battery arrives put your alarm into engineer mode before removing the front cover, connect battery and replace cover, job done Dont forget to change the engineer code and user codes from default Regarding pet PIR i cant really comment...

Hahaha its dead easy Put the covers back on start programming

Engineer code is 9999 P m me your email and i can send you some pics of the programming

Thats fine Remove the loop shaped wire then Place your bit of wire in the correct points and push that fuse in Alarm will make a beep to confirm reset Then stick that u shaped wire back where it came out

You can reset it now as long as when you apply the power you leave it on dont disconnect it or you will the alarm sound again Programming it is easy

Yes you now need to reset it You will need a small length approx 6" of wire to connect them two numbers together to reset, but first remove that top cover and remove the wires from them two numbers you are going to be using, bear in mind your reconnecting them after doing the reset When...

Heres the battery you need Look at this on eBay: 12 VOLT 1.2AH ALARM BATTERY ( 12V 1.2AH - 1.3AH ) http://bit.ly/IhZ1VQ Having this connected will stop it going off when you have power cuts or trips

Hi No 17 is further to the right you may have to lift the top cover up/off to see it Also the reason your alarm was going off when tripped is either due to dead or missing battery in your panel, looking at your picture you dont have a battery at all You can pick one up for around £10