Search results

Any idea how the live and neutral come out of the drill connections?

So what would I be best of doing. Cut the cable below the drill and try and re-wire?

Does anyone know how to wire back in to those connectors how to get the wires out?

Thank you it looks pretty good?

So I managed to get the pins of the multi meter on to the live and neutral on the drill and on to the live and neutral pins of the plug. Neutral connector to neutral pin gave 0.00ohms. Live connection on drill to live pin on the plug gave OL.

Thanks it's getting on to the neutral and brown wire in the drill casing that is going to be awkward

So that was a broken cable?

I have a rad to change position in a room and fit a new rad. All the other rads in the house are pipes flow to the top of rad. Return to the bottom It's a sealed system combi boiler. Would there be any benefit of piping fitting the new rad the same. Have never done it like that before. Is it so...

So put to ohms and I should get 0hms

To test isn't broken what should the readings be?

Ah I'm with you so I am testing if there is conunity between the cable ?

The blue and neutral pin on the one 10 plug?

Thanks so that's test between the live and neutral as it enters the drill?

Can you connect 10mm speedfit elbows on to 10mm copper?

It just stopped working one day when I tried it. It hasn't had much use at all in 8 years. No real heavy use. Was used maybe 5 times a year.

But the transformer works with other tools.

I don't think I have done that yet

It's about 8 years old but hasn't had much use at all. Because I got Ohms at the white connections. This suggests the bushes are ok?

Thanks I'll try that tonight. If it is 0hms there any idea where to look next?

So between the two white wires I got 0ohms well 00.6 is that close enough. I can't get a reading in the live and neutral incoming I think I'd need to pull the wires out.