Search results

give me a call mate, either on the office number 0844 807 1 555 or my mobile 07954 146323 and we can discuss what you want to do, and how you want to do it! john harrison (oasis technical) managing director, oasis technical services (Southern) ltd an SSAIB registered and inspected company.

did you just buy the flex 20 and remote keypad, or did you buy it as a kit? as if you bought it as a flex 20 rf kit, you would have got three radio pir sensors, one radio door contact, a remote keypad and an rf portal. if you have not got an rf portal, you cannot put rf devices on it...

Jay the information you have been given is WRONG! the Flex 20 can be used as a fully wired system or a combination of wired and wireless via an RF portal! i know this because we only fit Galaxy panels!! if you need any advice, contact me and will advise you of what to do and what not...

We have loads of the TPN boards out in service as well; but as other s have said there are not so many SPN out there the top bit is there to isolate the particular MCB RCBO that you are working on. it switches the comb off to the in side of the MCD RCBO very handy if you just want to...

8136 other wise known as Mosiac, also known to alot of pro engineers as a pain in the arse! not one of scantronics better panels. yep you will have to re program all attributes that you need, including zone (circuit) information personally, if you want to, get a local firm out to...

advice; remove battery from door contact, short the battery pins, on the contact, re install battery, try again. also with the PIR sensors, the new range, do not register them at the RF module, as they are now fitted with a back tamper. Oasis the above info was given to one of our...

quads in the main areas dualtech in kitchen/garage/outside shed (if you want to) Oasis

you could also sheck the SSAIB site as well, just as good, and most probably cheaper. but its down to you, depends upon your security requirements. Oasis

go into modify use `a` key to get to codes press `ent` go to `card no` oress a and 1 at the same time offer tag to panel system will populate display press ent then us `a` key to next screen oress ent then 12 press esc then to next screen select keypad press hash key press esc...

with the G2 range the codes are dissed of of the system and the time/date (as soc says) but even with the installer manual you still will not be able to default it. as it does not have the required data in the book Oasis

it is easy to reset a G16+ BUT you must reprogramm all devices back into it and all other attributes as a galaxy installer for many years, the only ones i hate are the 8 / 8+ 16/16+ as they were the cheap and nasty range of galaxy, removerd so many and fitted the older G18 in there...

i think that you have to program the zones to do what you need them to, sorry its a bid vague, but we dont fit that type of panel google is the best place to find the distructions! Oasis or maybe one of the other pro`s will be around soon, to give you a more in depth answer!

Europlex mate, the flex comes with manuals on disk

if your panel tells you MOD MISSING it should also prompt you to press the star or hash key to accept removal of the device. ensure that the only keypad on the system is set at `0` or it might not find it any other probs please repost Oasis

82 thats ok mate, no insult intended, and yep i undersant that the keypad could have been `previously enjoyed item` !! Oasis

82, if the system has been powered down for a long time it can, and i state can, lose settings. unless the system keypad has been removed or the rotary address switch played with losing address is really not an option. even if he fits a new keypad, it comes auto addressed as 0. change...

it usually means lost comms from end station, soft reset should cure it, and new battery in end station. Oasis

what is your budget???? Oasis

Joe 90 PM me or call and i will talk you through it Oasis (John)

the contract length for an aunt daisy system is 3 years not 5 and i am sorry you will have to get aunt daisy engineer out, unless you are out of contract, then you can go were you please yep we do galaxy and yep we do national and yep you can email me and i will give you the advice that...