Search results

Would most people use solvent or push fit in this situation?

Should it peal of the wood ok?

Thanks yes I need to take the bottom panel off to get access to adjust the flush pipe

What's the best way of removing this silicone after cutting with a Stanley knife to remove the panel to get access to the toilet flush pipe for a repair. I don't want to damage the wood by scraping the old silicone off before re installing. Thanks

I need to remove the silicone around a back to wall pan. To allow removable of the panel to assess the flush pipe. What's the best way of removing the silicone from the wooden panel? Or is it just cut it with a Stanley knife so can remove them silicone over the old silicone?

Thanks so maybe best of installing a new pressure reducer?

Thanks I think this is the pressure reducer on the incoming mains. Not the one that's part of a composite valve

The prv for a house

What are the symptoms of the filter in a pressure reducing valve being partially blocked. Are they usually easy to clean out/removable?

Are universal transition couplings best to attach to lead these days? I need to attach to the lead downstream of this stop tap.

I need to renew this lead flush pipe for solvent. Can anyone think of a way of neatly clipping it in the same position can't use normal saddle clips as I haven't got a flat surface either side. One side stepped on.

Thanks do you fit alot of prorads?

Have to put the pipes in well get them close then come back and pipe the rads when the plasterer has done. With plastic I have stuck abit of plastic up out of the floor with it being flexible at the pipe centres for the rad. How would you do this with copper pipe plasterer

Just means taking more floorboards up possibly.

What do most do when putting central heating in to a home with floorboards copper or plastic?

I'm with you and you glue that together? That was the issue I was looking at some heigh level flush pipe sets and they were a fortune

Would it be possible to make one of these out out 40mm solvent weld pipe?

When swapping a high level cistern. Do people usually swap the brackets too. Notice this are sold separately. Thanks

Was a pipe that goes through to the garage I cut the elbow off at the bottom and sleeved it properly

Plastic pipe