Search results

I contacted B+Q over a month ago and I've now sent them the same photos three times and chased several times on the phone. So far noone has gotten back to me despite multiple promises that they would. What on earth happened to B+Q customer service? The worktop has a 25 year guarantee but the...

not sure to be honest. One of the other quality issues is that on the same worktop there is a bunch of whatever they used to finished dried on the corners and never removed before it was shipped to me. Image attached. Does that help? I would probably try to blend any scuffing from flattening out...

I'll see what B+Q will do. I don't want to just leave it as a problem for someone else, that seems a bit unfair. Will let you know how I get on.

Thanks Mr Rusty. I note the product info on the stonefill doesn't mention it being suitable for wood. My hunch would be that it dries very rigid, whereas I guess a wood worktop can flex a little with heat/expansion. Still thanks for the tip and nice work on your son's worktop. I'm in contact...

Thanks Scally-Ho. Yes fixed down but I have spare lengths that I can use to make a plug. I'd be tempted to try the epoxy method first and then if it looks terrible, I can always resort to a plug. Any thoughts? Whatever I do I think it's going to be visible. I'm getting a few quotes from...

Unfortunately I'm selling the house. I suspect some homeowners would just leave it for it to be the next person's problem, but I don't think that's fair on them so would prefer to attempt a repair if I can.

Unfortunately I didn't notice it until it was fully installed with recessed sink and tap installed. Indeed it may not have "ruptured" until after it was installed. B+Q worktop - there were other quality issues too that I should have spotted earlier on. Anyway that ship has sailed. Sounds like...

Hi all A bit of a conundrum. I've just fitted a brand new kitchen with oak worktops but I've noticed an imperfection in the worktop next to the sink. Image attached. Basically there's a small void underneath this knot and the knot is slightly proud and jagged so could easily catch a loose...

Thanks fmt - I'm thinking maybe a couple of layers of masking tape then sanding very carefully if I have to sand. Duct tape might work but might leave a mess on my polished chrome hinges. I might just use white fine wood filler (I like the ronseal two part - does it dry bright white?) and see...

Thanks Diver good advice. I do do these things, but it often doesn't make a great deal of difference if there are multiple coats of paint over and around the hinges, plus exact replacements are rarely available for older propeties. Re. the filler, any tips? I'm thinking of putting masking tape...

Hi all. Looking for some tips. I'm replacing hinges, latches, and handles on 14 existing painted doors (including cupboard doors). I think it's fair to say I've found something I'm not particularly good at (or patient enough?). A couple of photos attached. No laughing. My question is this -...

thanks everyone some interesting answers - sounds like there's nothing out there i haven't tried already - although maybe i'll try some big wipes whilst i have a few in the house. didn't think much of the screwfix version. definitely on board with "wiping it on the cardboard" option - basically...

OK I happily admit I'm rubbish at applying silicone, caulk, mastic. You name it I'm bad at it and yes I've tried every tool in the book. I can live with it - that's not what I'm posting about. When mastic'ing/caulking I find by far the most convenient and effective place to wipe excess...

Hi all just picking up on an old thread. On the same theme, I am isntalling a water heater which has a pressure relief valve (pressure only, not temperature as not required) which only deals with back expansion in the system so only ever would let out tiny amounts of cold tap water (or lots if...

Hi all. I'm reviving an old thread as I have a similar question that I can't find answered anywhere else. My doors misalign in the same way as above, but there are two seals on my patio doors. One is grey and one is a thicker black. The black one does create a seal between the sliding door and...

Thanks Ronnie. I've ordered a thicker gasket to see if that works. I suppose ultimately there is no way to "bend" the frame or casement back into a straight line without replacement so it's going to be a bodge one way or another. Thanks for the advice.

Both. I think the sash a little more than the frame.

Thats interesting. I wonder if I could do something similar with some silicone in a mould without it looking terrible.

Hi all I have seen this topic discussed very briefly in various forums but no real solution ever being offered. I own a flat in a late 70s block. The windows would originally have been aluminium but were replaced at some stage (I'd estimate 10-15 years ago) with fairly decent quality upvc...

Thanks Lucid that's very helpful to know. By the looks of the images on the website you shared showing how it should be done, the amount of kit in our block doesn't look too far out of the ordinary (ie. the number of what I assume are splitters and amplifiers), just that it's been installed in a...