Search results

i want to add a light into the cuboard under the stairs. The consumer unit is located in that same space. Where do I put the wires into the unit (there is a seperate switch in the unit for d'stairs lights)United Kingdom

I intend to install a double socket at the hatchway in my attic. There is a single socket directly below the hatch in the hallway. Can I just place the new socket wires directly into the existising socket for it to function properly/safely. Thanks in advance-UK-

Help, I have just moved into a house with a TS300 (Tunstall Security) panel. It seems to be live (having resoldered a connection) but we have no instructions. Does anyone out there have some?

They had a pretty good variety of colours in B&Q Warehouse.... I'd imagine all the Warehouse's would have them though the particular store I got them from was the one in Northampton.

I dought if you have two water supplies to the house. You say the stop cocks are onto copper, this should be 15mm into 1/2 inch galv steel pipe, if you can I would change the whole pipe back to the mains. More info is needed to give you a better answer. If you have galv 1/2" then this type of...

Yes, I would do the same, change ths single socket to a double one but if you also buy a fused spur you can wire this into the double socket and then wire the security light into the fused spur leaving the double socket free. Don't forget to reduce the fuse in the fused spur to 3-5Amp. Also...

Which color of house absorbs the most heat?

where did you get the glass bricks?? plse advise. ta.

nice one amtodd :) surely anyone with half a brain knows you need a corgi registered plumber to install and repair gas :eyes where do these people come from..

I HAD THE SAME PROBLEM LAST YEAR AND THE CAUSE OF THIS WAS THE THERMOSTAT IN THE BOILER WAS FAULTY,TRY REPLACING IT IF YOU CAN. GOOD LUCK ANDY

Forgot to mention when I switch on the hot wazter tap the noise goes away. The pressure is set at 2 BAR when hot.

Most suppliers will offer a mail order service on parts. fist point of call for me is always the maker.

we have storage heaters in our flat and we are on system 7 which heats them over night anl lets it gradually during the day. The only thing is that they are not warm enough by any means and the settings are up full whack, am I doing anything wrong?

I want to create an arch effect over my bath and down the front of the bath to the floor. What wood is suitable for use in a bathroom, bearing in mind it might get wet but hopefully not soaked as the lower down part will have to be tiled.

The pump in the gas boiler is no longer pumping the water around the radiators. This happened before and the plumber kick-started the pump. How would you do this?

thanks sooooooo much u probly saved my life this is a great site and very user freindly well done and thanxs again lee

Hi, I have recently moved into a house with a combi boiler system made by Ferroli for HW and CH (Optima 710). At first it was working fine and then it has recently started dropping pressure when the CH is off - down to about 0.5 Bar. Since the CH and HW will not fire up until the pressure is...

Doing any form of labour will save you money since it will be less time on the job

the initial post was nearly a year ago.

I's got to be air mate,try connecting a hose pipe from the kitchen cold water mains fed tap,to the hot water tap,open both taps fully ,that will push the air out of the system.