Search results

https://www.ryeoil.co.uk/shop/boiled-linseed-oil/

Cheers guys. I just seen this https://www.amazon.co.uk/Decking-Litre-Clear-Softwood-Treatment/dp/B01G3XL0ZQ/ref=mp_s_a_1_12?keywords=decking+oil+clear&qid=1582195735&sprefix=decking+oil&sr=8-12 Any good? Or do I bite and buy 2 or 3 cans of 5l decking oil or wood treatment

Hey, as I've said in previous posts I'm building a bike shed from pallets. This time I'd like to know what's best protection from the 2 links below or other suggestions. 2 sides I will most like not be able to protect very well but will try to coat again in couple years ...

Thanks once again foxhole

I leave the windows open upstairs for like 4-6 hours with the back door open similar amount of time. Is that enough? I can't open the diner window as it blocked with pallets but back door is like 8ft away

I've been using a reciprocating saw cutting all the blocks in half on a pallet allow a week to dry in the shed/utility room then with pry bars take the blocks off the try my best to pry them apart. I found this easier than trying all when socked. If anyone has a easier method, let me know. I...

Cheers I'm assuming they are damp . They are on a pallet slatted stacked with tarp over. I used a pallet breaker to take the easy boards off 30 or pallets. I'm now left with 7 to 9 boards that are the carcass of the pallet block pallet either compressed chip wood or actual block wood.

Long story short I started to build a small bike shed just taller than the bikes from pallets last August. I managed to build the base and two walls with the easy to take off boards and stored some more. These are under a tarp so cold and I assume damp. These ones I was wondering if I was to...

Fox I have the pallet breaker and that was brilliant for getting the slats that weren't nailed in to the blocks in the corner on the centre slats. I've broken too many trying to use that I gave up. I have various wrecking bars but nothing is quick.

Because the only other 2 saws I got are a circular saw and jigsaw and I can't seem to find long enough jigsaw blades

Hey guys, I have around 30 carcasses of pallets left. I took the easy boards off last year now I find myself spend a couple of hours trying to break one and try keeping the boards in one length. Anyone know of a quality reciprocating saw blade that will cut through those nails. I was going to...

Thanks. The loft has insulation and I know there is ventilation as when I been on the ladder at the hatch I can see outside. As for condensation I tend to leave 2 windows open in day for good 5 hours. The windows have no air vents

Bob, cheers I'll try for a roof pic asap. 'll try find the report and see what it says

My partner in her wisdom just decided to paint the bedroom a year ago in her hope of making it look good. I don't think there was damp then but she never took the peeling paint off either

The damp

Image 1 is where damp is Image 2 just cracked felt Image 3 is how half is Image 4 and 5 is how some are but no signs of damp.

I'll post pics when I get in of the outside and inside. I'll have to wait for someone else to go in to loft for me as I can't get up there myself.

Thanks ken . We bought the house 2 years ago and I don't think there was any mention in the report. I doubt what the council did has anything to do with it. Also no idea how old the felt is. I'll post pics Tomo if it's light enough when I get in.

There is damp on my ceiling,I've had a quick look outside and noticed that roughly where damp is the felt torn and is now hanging down. That has happened in several places. What are my opinions? If. Needed I'll get photos in daylight. When the council was putting new roofs on my neighbours...

Just an example I bought a few quid carpenter pliers had no choice as needed them. I have already damages to end. Now a bit sloppy. I been looking at knipex versions for around£20 if I can't beat them I'll most likely get them. I needed a set of hex keys a few months ago ended up in Screwfix...