Search results

well I'm not a joiner or carpenter. I bought some catches recently ..i wanted good ones ..and the good ones were the euro spec ..well the best ones available around here .. problem was ..they are quite deep .. about 23mm... 24mm with the projections now then ...i read the instructions...

that looks the business ..I wonder, with all that overhanging weight ..you have to clamp it so tight that it marks the door. all the best.markj

Thankyou DC Are those screw in threaded cutters avalable anywhere else cheap Mine uses a forstner bit...drilled a dimple in it . ...put it in a solid bar ..with grub screw locking it. those cutters that dbb uses look much more up to the job .. i've got two TCT forstner bits coming from...

http://www.soubertools.com/dbb.html I started building my own device ..spent a couple weeks doing it ..then I found that there was already one out there .. :( called the Souber DBB Anyway my own gizmo is quite different but not as sophisticated ..and i learned early on that the whole...

ok thanks

efficiency verses size data ..that's what I'm after .. or how many kws i can get out of a set size of rad . if that makes sense . all the best.markj

i think the living room needs about 4800 btu ...thats from a website that i visited earlier .. living room DG patio doors ..good ones...one outside wall facing south semi roughly 3.5 mts x 3 mts i just want a large capacity rad ..that is roughly 6 foot x 2 foot that is over capacity ..that...

OK thanks mystery man .. i would not have realised that the quality of blowing hot air wasn't as good as radiant heat ..if you had not have said.. it made me sit back and think ...yup you are probably right. is there a website that gives radiators efficiency ratings .. i think i may...

What can you all tell me about these heaters .. I was thinking of having a 14-10 in the hallway and a 9-6 in the living room .. Idea being was with the proposed new condensing boiler ..they would loose more heat ..so make it even more efficient. when the gas boiler switches off on the...

ok thanks drill now fixed ..dirty contacts where battery connects to .. all the best.markj

Most of the karcher stuff is DIY stuff ..some models have total stop ..the total stop goes faulty ..and the whole plastic piston barrel will split. Ive had a KRANZLE 140t for years ..these are very well made and German ..cost a bit ..but mine is over ten years old now .have used it for...

makita 9.6 volt (old style long handle drill ..long battery)..chuck question Ive picked up from a car boot ..one of these, its mint..i already have a couple of them with the batteries etc This ones dead ..so i need to pull it apart ..probably a solder joint fault..... hopefully ...

i don't know what the time scale is to when I'm ready to have someone fit the boiler ..when the first plumbers let me down ..i started on another job thats involving fitting out the whole house with new door casings ..doors and skirting's ....im not very fit ..this job will take me sometime...

Well hearing about the reliability of all condensing boilers, i dismissed a combi ..on grounds that i have a tank in the attic with an immersion heater . The reliability issues made me think in alternative ways .alternative thinking says have everything at gravity pressure...and less...

yup, the servers probably top kit .. my own computer has lasted about 9 years of 24/7 continuous operation .. but that was top spec at the time Asus A7N8X mother board.... the caps had just began to swell, so i had them all replaced with top quality Panasonic matsushita..should...

yep ...i like that feature of the backplate btw this brand new and fully functioning programer with the danfoss tp5 was only £5 from attick sale . got some prices on the Vitodens 100-W Compact today 16 kw ...592.54 plus vat 19 kw ...604.66 plus vat 26 kw... 642.14 plus vat...

this one ? http://www.viessmann.co.uk/en/products/gas_fired_condensing/vitodens_100-w_compact.html and Ive just phoned the tech support ..got through strait away .. he said ..to use the all weather function with external programmer with this boiler .Ive got to get to the commons .Ive no...

i have a parkray everglow .thats probably living on borrowed time ..its over 40 years old Anyway .Ive been heating my house with paraffin for the last few years..because it was at first cheaper than anthracite, whilst i saved up FOR this boiler and other jobs ..did you know that the everglow...

Ive just had a look at the Remeha and i see that they are high tech ..lap tops plug into them etc .. now that's put me right off if anything ..im trying to get away from high tech ..to me hi tech means :- usually a high fixing price ....and confusion when it packs up. Ive had enough...

four single glassed windows ..all 3 x 3 foot single solid concrete 4 inch block wall with outside rendering double layer of acoustic tiles fixed to the inside of the apex vaulted ceiling....so 2x 3/4 inch one layer overlaps the other ..all joints taped and glued ....air bleed vents 3...