Search results

i give your cast to plastic fitting two weeks and they will be leaking

and you want the verge cut to a decent line

i think your render at the bottom of your roof on the gable is loose id have the slate on verge removed from top to bottom any loose render sorted slate put back in with a 50mm overhang over the wall with reclaimed slate to match your roof make sure you ask them to match will make your roof look...

the plastic to cast fittings are crap. either do it like i says or butt stopends together

if you look at the slate on eave it looks like there's no over hang. that's how a side shot would be good

Looks tidy enough to me

and one of side on of that verge there could be a couple of things wrong

put a picture of further up the roof please till i see if theres anything else

and where the plastic meets the cast its better that the plastic is under the cast those plastic to cast fittings are crap give a good couple of feet over it and have a good run gravity will stop it leaking if your unsure seal it up before you lap it

so is it leaking just where it meets the outlet and where it joins next door thats actually pretty easy to fix extend the plastic to the running outlet and where the join to next door is extend it past it about a meter the fact its extended so far over the neighbors guttter in itself should stop...

Render straight on to the plastic lean to is defo going to leak. To do it right id take off all the render which looks shot id put a lead flashing against the wall down onto the flat roof wield in slate pieces round the pipes put a bellcast over the new lead remove the gutter and replace and re-...

cast gutters are way better than plastic

then u grind it off ive done it 1000 times before

unbolt it re-putty and re-bolt

This is the roofing section my dear

and then seal it you could get lucky and it will be a nice fit

The gutter is some kind of ogee gutter you could get one thats similar and screw it to it not the best but will take the bad look off it

the eaves fixing that come with most of those dry verge are usually pure pants best thing is four inch screw with a rubber washer on it

can we get picture of the shed please

you can let the birds come and go for sure then fix it