Search results

  1. 6

    Bonding coat vs undercoat

    Cam anyone tell me the difference between thistle undercoat plaster and bonding coat? Looked all over but cant find any info on the difference between the two. Thanks
  2. 6

    Earth bonding

    Yep i forgot to mention that its a bathroom and the earth cable was just joining the hot and cold feeds. The pipes go under the floor into a hw cylinder cupboard where there's several other existing earth straps linked up to the old/existing pipe work that have not been modified
  3. 6

    Earth bonding

    Not sure if thos this is an electric or plumbing topic nut here goes.ive moved some pipes from here: (Note the earth bonding on the old pipe run) DSC_3789 by 600rob posted 8 Aug 2021 at 10:28 AM DSC_3788 by 600rob posted 8 Aug 2021 at 10:28 AM To here DSC_3792 by 600rob posted 8 Aug 2021 at...
  4. DSC_3792

    DSC_3792

  5. DSC_3788

    DSC_3788

  6. DSC_3789

    DSC_3789

  7. 6

    Shower tray installation

    Its a crosswater tray, same as the one i linked in my original post
  8. 6

    Shower tray installation

    Yes ive already got it. Its got circles marked out s you described. All flush with the underside of the tray DSC_3786 by 600rob posted 4 Aug 2021 at 8:29 PM
  9. DSC_3786

    DSC_3786

  10. 6

    Shower tray installation

    Ive got an acrylic shower tray like this which i want to install directly onto the ply flooring that ive put down across the joists. Should i be using something like a single part flexible tile adhesive or a bed of mortar to bed the tray into? Ive seen several guides online but these seem to be...
  11. 6

    Shower tray sound deadening

    Any one know of a good product that i can put in the void between my downstairs ceiling and the bathroom floorboards, located below the shower cubicle in order to reduce the monsoon like rain noise i get downstairs every time someone uses the shower. Was thinking of something light like celotex...
  12. 6

    Triple thickness Plasterboard fixings

    Cheers both zip toggles look like the ticket.
  13. 6

    Triple thickness Plasterboard fixings

    I need to fix a towel rad to a paramount partition wall. 35mm cavity with three sheets of 12.5mm PB on the side that the rad will be going on. the rad is approx 1250x450, 14kg empty, so wont be massively heavy when full Normally i've used hollow wall anchors ( the umbrella type) on single...
  14. 6

    Joint compound before shower pump and valves

    Cheers. I decided not to use any thing on the first attempt.... If i get any leaks i can undo and add something afterwards
  15. 6

    Joint compound before shower pump and valves

    Just loose fitted up my shower pump and shower valve install. Ive got a couple of isolation valves on the hot and cold inlets to the pump and wondering if its good or bad practice to use a bit of joining compound on the olives? Or could i be potentially be creating a problem if any of the...
  16. 6

    Shower wall plate with out thw elbow

    Ahh yes, either of those would work. Cheers
  17. 6

    Shower wall plate with out thw elbow

    Does anyone know if there is a shower back plate compression fitting that does not have the 90 degree elbow? Basically a straight through connection with a 15mm compression fitting on one side. Mounting flange in the middle and a 1/2 in thread for the shower arm on the other side?
  18. 6

    Blanking off a tee

    No worries, Found it. Blanking disc. Thanks Rab
  19. 6

    Blanking off a tee

    Have you got a link to that item please? Not sure what the correct name for this is so I can have a look at how its fitted Cheers
  20. 6

    Blanking off a tee

    I need to permanently disconnect the hot pipe on the 15mm pipe shown below Untitled by 600rob posted 4 Jul 2021 at 12:03 PM First plan is to try and disconnect the tee then replace with a straight coupler but the access is very tight behind the HW cyclinder. Would another acceptable option be...
Back
Top