Search results

Condensation inside the sealed unit means air has entered the sealed unit and has to be replaced. It could be just the way the glass was installed on the day with incorrect / miss aligned glass packers eventually damaging the seal? Or a manufacture issue? An old fashioned hot melt black spacer...

The slack is usually in the mechanism itself and not the handle. Open the door remove the handle and using a flat ended screwdriver turn the mech to see how far it turns until the door keep/hooks/rollers move. If its that thats slack then depending on the type of mechanism it's a diy fix 70-110...

Spot on, so its the pump route. if i'm shelling out for a pump can i also help the 5 min wait for the hot water to get to my kitchen tap that's approx 15 mtr away from tank? silly q coming up... :oops: if I get pump that feeds two showers one up one down (and kitchen tap maybe) do I then...

yes you can. if fitting a wicks/ b&q then keep em glazed (packed glass in a factory)and just ensure they are 100 % level all ways. trouble I have had is anything DIY supplied is then getting the locks to work is a pain. if your willing to mess around with that then go for it.

long stoy short.. moved into a 50's property ..bungalow with loft conversion. It's got a shower in the roof/conversion with a cold water tank at the same level, also a shower/bath ground floor with a heated imersion tank at the same ground level. spent 50 quid on elec shower for up...

the situation is a block of flats 12 in total. The windows I need to order as I understand do not have to comply with normal 450mm 0.33m2 opening egress as it's a non? dwelling? building. is this correct?

..ok. you will probally need the installer back to de-glaze it and pack it (toe and heel) again so the opposite from hinge side top door leaf mitres are in line with the door frame mitre. Some doors come glazed so the fitter will not bother to de glaze and set it up. once the weld mitres are...