Search results

  1. O

    Glow Worm Hideaway 90 tripping RCD

    Hi - I'm afraid I can't even do 1 - when the spur is off, the timer is off. And when the spur is turned on, it trips the RCD! :oops:
  2. O

    Glow Worm Hideaway 90 tripping RCD

    Are you able to elaborate, please?
  3. O

    Glow Worm Hideaway 90 tripping RCD

    Hi - I have opened up the boxed-in section beside the boiler, to discover (what looks like) a red Grundfos Selectric Pump, and 2 electric switch units..? Either side of the pump, are corroded/green shut off valves - one of which is weeping - could the moisture be getting on the wiring? And if...
  4. O

    Glow Worm Hideaway 90 tripping RCD

    Hi - re checking the pump, could you elaborate please?
  5. O

    Glow Worm Hideaway 90 tripping RCD

    Many thanks for your advice. So should I call in a boiler engineer, or an electrician?
  6. O

    Glow Worm Hideaway 90 tripping RCD

    Hi - I'm afraid I don't know enough in order to answer your questions. I have no airing cupboard, since the HWC was moved up into the attic. I turned the stat on the boiler to zero/off, and switched on the fused spur point - and it still tripped the RCD.... Any ideas?
  7. O

    Glow Worm Hideaway 90 tripping RCD

    Hi - all I know, is that I unplugged ALL appliances (kettle TV, washing machine, etc), in order to identify the cause, and the RCD now only trips whenever I switch on the fused spur for the boiler......
  8. O

    Glow Worm Hideaway 90 tripping RCD

    Hi - I have a GLOW WORM HIDEAWAY 90 BOILER (G.C No. 41-313-84), which has started tripping my sockets RCD. Dare I say, it used to all work fine, and nothing new has been done to it. Any thoughts would be gratefully received.... OJ
  9. O

    SUNVIC DUOFLOW ACTUATOR

    Yes, plus an earth wire - 5 wires, in total.
  10. O

    SUNVIC DUOFLOW ACTUATOR

    It's not a trick question, guys - is no-one able to offer advice?
  11. O

    SUNVIC DUOFLOW ACTUATOR

    Hi - have tried replacing a dead DM4601 with a new DM5601. Wired it all the same, but it doesn't work - it sits in the three quarter way round position, and doesn't move when I change from HW to RADS, etc. Any advice?
  12. O

    External PIR lights

    Does anyone know if you can buy 2 external lights, with 1 PIR sensor controlling both lights, or would I have to buy 2 with sensors, and alter the wiring? Any advice would be appreciated...
  13. O

    New radiators

    Cheers Kev...
  14. O

    New radiators

    Hi - I have several old rads to replace with new - all the measurements are a few inches out - too narrow, or too wide - is there anything on the market which means I won't need to alter the pipework? Thanks in advance... :oops:
  15. O

    Bristan Colonial bathroom taps

    Hi Kevplumb - I've tried that, but it just chips the edge - there is less than a millimetre of the edge actually visible...! Arrrrgh!
  16. O

    Bristan Colonial bathroom taps

    Hi Burnerman - no, the top is fairly plain and flat, with the white plastic "HOT" cap on it....
  17. O

    Bristan Colonial bathroom taps

    They look similar to these: http://cgi.ebay.co.uk/BRISTAN-COLONIAL-BASIN-CHROME-TAPS-NEW-BOXED_W0QQitemZ140356393459QQcmdZViewItemQQptZUK_Home_Garden_Bathroom_Taps_PP?hash=item20ade499f3#ht_528wt_908
  18. O

    Bristan Colonial bathroom taps

    I have a dripping Bristan Colonial tap, I guess its the washer, however I can't even get at the screw holding the tap on, as the little plastic cover won't budge! When I try to ease it with the point of a blade, little bits of it chip off, and it just won't budge. Any advice much...
  19. O

    Problem with AEG Lavamat Turbo 16810

    Hi - yes, I've done that already, but not much the wiser - thanks anyway...
  20. O

    Problem with AEG Lavamat Turbo 16810

    Tried to do a full wash, and now the machine has stopped, showing a flashing E20 message - with the drum full of water. Any help would be appreciated...
Back
Top