Search results

I have got few years old Baxi combi 105HE. As such there is no problem with hot water and the heating, so far they seems working fine. Initially when you use the tap for the hot water, the Tap and the burner LED's comes on the combi and they go off when nobody using the hot water, but for last...

It seems less than a meter and the combi boiler is baxi 105he.

Guys, Need some advise. In my kitchen I saw speedfit plumbing fittings (equal straight joint connector) on the copper hot pipe which is coming from the combi boiler. Just want to know, will it be OK or do I need get it sorted?

Sorry mate, never did this before. What is this battery jumper?

Cheers, what is the main difference between texecom 1/2/3e? Seems shape to me? Would it be a straight swap?

I had a problem with external alarm bell box. Few weeks back it went off without any reason, buzzing whole night. Does not mater what you do (reset from the panel) it was continuously on. Next morning my next door opened the bell box and pressed anti tamper switch which was inside and it went...

You are right, but I measured my kitchen cabinet doors and they all are 720mm not 715mm.

I am struggling to find the replacement kitchen cabinet doors with height of 720mm. Any recommendations? Much appreciated.

Found a guy who said he would be able to keep the tiles and fit the new worktop which is 40mm in height. Currently I have white coloured worktop with white appliances. Now I am going for "Midnight Granite Matt" worktop (url below) with stainless steel appliances...

Thanks mate, How much I have to pay for labour in west midlands? What materials and types to consider / avoid?

Evening all, Looking for some advise as thinking of changing the kitchen worktop with new appliances. Already bought all the appliances (hood, gas hob, oven) At the moment the height of the worktop is around 30mm. Requirements - square shaped kitchen worktops Left: 1230mm (no...

Anybody else, please confirm...

No it has not got plug attached. There is a small box on the rear of the oven from where I have to make connections with plug. That was the reason I was worried. According to the manual: To connect the power supply cable, proceed as follows: Unscrew the cable clamp screw and the contact...

Hello Guys, Need your expert advise please. Apologise if this has been answered before but I am struggling to find the right information. I recently purchased a built-in single HOTPOINT oven to replace my old one, however upon pulling out the old one I have discovered that it was plugged into...

I do not know whether it is the right place to post my problem or not. I have a Baxi Combi boiler 105HE about 4-5years old and has started loosing pressure. When the heating is on the pressure is fine, but when no heating is on and the water on pre heat pressure bar is at 0, So I keep having to...

Cheers, I was in the impression, that I need 10amp cable. So this means anything between 3amp to 10amp wil do the job. I opened the boiler yesterday just to check the connections. Seems pretty straight foward. I will go from 3amp cable. What I am thinking is use two 2core 3amp cables. One...

Not a problem mate. At least you replying and helping that is more than enough. To be frank B and Q is quite far from my place, i did not go there, but went to town to shop in general but as you said no body stock 5 core cable. One thing I checked the BandQ site with the following url it is...

Thanks for helping so far. Today I went to buy 4 core wire. The salesman was asking me for what sort of AMP you looking on the wire. I said I want it for Mains, but he said we got some 4 core wire for door bell something like that which he think it is for very low voltage usage. Then he...

You Wrote So this means, only two wires are going to the boiler from the receiver connecting Terminals 1 and 2, and other two from the receiver can be connected to any of the main supply. It is not necessary to connect them to L and N terminals in the boiler. Please clarify, sorry for...