Search results

Basicly the alarm works but the 2 LEDs that flash on the bell box don't work. I said why are they not flashing and he said he couldn't give the bell box permanent live as the siren just keeps sounding even when the panel is deactivated.

Ok so the bloke came today. He couldn't get it working at first but I'm not sure how he wired it up in the panel but its working in a fashion. Basicly the bell box sounds when the alarm is activated but the bell box only gets power when the alarm is activated. So the LEDs don't flash on the...

Cheers for your help mate, much appreciated. I'll let you know how it goes or what the problem is.

I did do a continuity test on the cable which seemed OK. I've got a bloke that lives down the road coming to look at it tomorrow. He fits fire alarms and stuff so hopefully he'll sort it.

Yea there wired correctly. Tried swapping them And when I put the power back on it activates, then I put core in which stops the siren but then the panel comes up with "tamper fault lockout"

I have 3 black wires going into 0v on the panel with 3 red wires going into +13v Tamp has a jumper(staple) in it.

Also there are 3 jumpers in the bell box. Batt is off Another is on SAB LC is off

Not sure how to email pics. Can you see the ones on page 1 Basicly I've wired it up how you explained, taped the tamper down on the bell box. Put the cover back on the panel and then when I put the fuse back in the spur socket the alarm activates. I then type the code in which deactivates...

Will do now

Ok so wired up Bell box as stated. I've put the - strobe panel to The bell box but the panel has + and - wires. The problem still exists though. The alarm goes off when activated but the bell box keeps on alarming when I deactivate system :x

On page 1 I've got a PIC of the wiring. Who ever installed it used telephone cable. I think what you have put is how it's wired up. The whole problem is the alarm works but when it is activated the bell box would sound, then when I deactivated it the bell box would just keep sounding even...

Looking back at my old PIC on page 1 there is a terminal with a speaker shape on it, is this where it should be wired?

Yeah pretty shocking I know. I'm trying this and if it don't work I'll be getting someone to look at it.

Sorry for the mega thread resurrection but I never got round to sorting this problem out :oops: I've just ordered aTexecom Premier Odyssey 1E 109db Bellbox https://www.alertelectrical.com/m/prod/486 And a16 ohm Extension Speaker. https://www.alertelectrical.com/m/prod/1538 The bell...

Thanks. Is that how you measure for these? The 1160 is the gap between the 2 nuts on the valves that screw onto the rad. Is that defanitly the sizes I'd need for the 1100 rad? I know it sounds obvious but just wondered if you have to take any threads into consideration.

Took my old rad off in my kitchen as I've replastered and fitted new kitchen. The distance between the 2 valves is 1160, the closest sized rad I can find to that is 1100. My question is will my pipework have to be adjusted or are the any extension pipes which I could use to make up the...

Can you link to the back box which i would need mate? also is there a Pattress Box i could use instead as the wire is not in the wall?

Where from mate? I tried screwfix but they don't stock them. Just looked on newey & Eyre site and can't seem to find one .

Does this sound OK which someone has recommended on another forum if I wire the oven to the hob until I get the dual plate ? Connect the oven to the hob with the supplied cable. If you use the second diagram on the back of the hob. All neutrals go into the terminal on the right (5) with a...