Search results

Ok, I put power back on and the siren sounds, I type code into keypad and the keypad stops sounding and resets but the bell keeps sounding.

Done, just to point out if you look at pics this is how it was wired before

Done No tones.

I tested continuity by putting 2 wires together at a time at the panel and testing with multi meter at the bell.

Just to point out this alarm was in when we moved in, its not a new alarm.

Continuity fine .

But don't I have to touch both ends of the wire ?

No difference when I push spring in on panel, The cover is on the bell I have a multi meter, how do I do a continuity test

Done, alarm still sounds

Ok when I put power back on the siren sounds and the two led's are flashing as normal.

Pretty sure the wires are intact. Do you mean are the led's not flashing when the siren is going off ? I take it the hard negative is the green. Which colour wire is the hold off negative ?

What you on about ? Yes I started it saying it didn't work which it didn't, I've done what I've been instructed to do and it resulted in what I've explained above. The siren is supposed to go off all the time is it ? And no, I'm not too up on electrical which is why I've posted on a DIY forum...

I've had to leave the fuse out for now, every time I put it back in the bell box sounds and so does my keypad, I put the code in the keypad which resets and stops sounding but the bell box carrys on.

OK, BEEN up up and disconnected battery to stop the siren. I did what you said and touched the green to the orange but nothing happened, it was only when I put the green back in its terminal when it went off, but it wouldn't go off even when I typed the code in.

Done this but bell box won't stop sounding HELP

Thanks, I shall try that tomorrow

No it dosnt go off when I take the cover off, havnt tried taking the - wire out, that's the trigger in the bell box isn't it ? Can these alarms be programed that the siren dosnt go off or not ?

Hi, Yes it does, Ive tried testing the siren on the test procedure and it does not work then either. Here are a couple of pics of the panel & bell box wiring

:arrow: Hello everyone :D just joined so this is first post. I have moved into a new house which has this alarm set up, as far as I can tell everything works on it apart from the bell box siren going off when activated. The 2 led's that flash all the time are flashing so its got power, I've...