Search results

Well that's cheered me up no end!

Do you mean if I had called them out when the problems started they would've repaired it for a total cost of £105?

Thanks. I won't be throwing anymore parts at it I dont think. Already water pump £55, Pressure Swithch £12, Heater Element £25, PCB £64. For £156 I'd have been better investing in a new machine!

Rocks1. Is this the part you are referring to? http://www.hotpoint-spares.co.uk/dispenser-valve-for-wf541g-p-14912.html

Thanks I'll give it a try.

How do I rectify that?

My machine won't go through a whole programme. It stops on the rinse and spin cycle. To date I have changed the water pump, heating element, pressure switch and PCB. I've checked the brushes and they seem fine, not even half worn. Anybody any ideas as to what the problem could be?

Thanks Does that mean that changing the heater element would cure it or do I need to do something else, excuse my ignorance!

Yes

New Symptom- lights 2+4 and on/off light flashing. Does this mean I need a new pressure switch or do the earlier symptoms have any bearing on that?

Checked the brushes and they seem fine, less than half worn. Blew out the pressure pipe and blew into the switch and it makes a clicking noise. Cleaned the filter. Machine still has same problem. Switch it off and select drain, switch it on, it drains, switch it off and select fast spin and...

Rocks1 Machine has been playing up for a couple of weeks and even with relatively small loads of ordinary clothing same thing happens. Every now and again it will complete the whole cycle without a problem. Don't want to spend too much time and money trying to repair it when a replacement...

Thanks I will have a look in the morning, had enough of it for one day. Just took a couple of towels out to lighten the load and it completed the spin. I wouldn't consider it to have been overloaded though.

My machine wont do the final spin. Goes through the wash cycle and tries to spin but cuts out. There are no flashing lights and the pump was changed today. Anybody have any ideas?