Search results

Yes they are 60 x 30 so i think they would look fine with 4mm spacers This is the actual room layout: I think i am going to brick tile the walls then brick tile the floor aligning the floor tiles with the far back wall (The wall with the show tray and bath touching it). Does that...

Hi All. Tackling a big tiling project in my bathroom. I am using the same tiles on the wall and floor, what is the best way of aligning them? Would brick tiling be better for this? I have noticed a few pictures on the internet and for brick tiling they have simply done the floor tiles in...

Sorry just seen another post, seems the best is Zinsser - Perma-White Thanks all

Hi, I am looking to paint my bathroom plain white, can anyone recommend a decent trade paint? Is this any good: http://www.toolstation.com/shop/Painting+%26+Decorating/d150/Emulsion+%26+Gloss+Paint/sd3173/Kitchen+%26+Bathroom+Paint+2.5L/p67664 Thanks

:) :) It was £130! and made in England too.

Hi, As above, shower tray is now too big to fit my perfectly measured 1400 space. Is this a fault or would it be classed as something like minor manufacturing differences? I guess I could start hacking away some of the plasterboard but not too happy to be honest! Thanks

Hi All, Thinking about buying a bathroom suite from Better Bathrooms, has anyone bought one or fitted one from there? I am interested to know about the quality of the bath. I am not sure if its worth paying more for a Hudson Reed bath? Thanks

Will that work? its for CCTV not for this purpose. What about Voltage Drop that i see mentioned in a few places?

Hi All, I bought a waterproof TV for the bathroom and had a socket put in the loft to plug it into (fitted by electrician) The TV has turned up today and the power lead is too short. Is there any way at all of extending the connections on this transformer: I will need to cut...

Hi All, Got a leaking radiator valve, its leaking at the spindle. I have tried to tighten the nut next to it as tight as it will go, but its still leaking a bit. See Image: Whats the next step? Undo the nut that i have tightened and try and get some ptfe tape down there...

Hi, Just doing some speedfit plumbing and have a real tight corner into an existing speedfit tee, can i use one of these: http://www.screwfix.com/p/jg-speedfit-pem221515wp-stem-elbow-15mm/19044 Will the male end fit into a female end of a speedfit tee? Will it need pipe inserts? Thanks

yes its fitted but I have taken it off to test it and it seems to be leaking: Surprised at that as the whole system is brand new?! Also when i took the pipe off just after the non return valve to check it a fair amount of water came out. I guess this is what is trickling back into...

Hi All, I have just fitted a new sanicompact 43 (Toilet and macerator in one) including new pipe work to soil stack. It all seems to be working fine except the motor seems to fire up every ten mins, pump the water out the bowl and then re-fill it again! I have the basin pipe work attached...

Hi, How can i convert a 32mm solvent pipe to 40mm solvent pipe. Its for a sanicompact toilet to connect to a 40mm stap on boss. I bought the following reducers: http://www.screwfix.com/p/floplast-solvent-weld-40-x-32mm-reducer-black-pack-of-5/26753#product_additional_details_container...