Search results

I have reset to default - all I have then changed are code 1 and code 2 and set the time and date. When I enter the code to set the alarm the panel just continually beeps and will not set????

Ill go and reset to default - just to check the "set" is at the very top of the board and the "left pa" is at the end of the zone connections at the bottom? link those and then powe back up, wait for alarm, power down replace wires i any removed (there isnt on mine as nothing in set or pa)

Sparkymarka - does this pic help? Top left pir - bottom right door contact. This all that I have in my workshop . Just spent the last hour trying to set the alarm and failed miserably. Entry and exit is roller door. How exactly should I program the panel?

The keypad is in my workshop right next to roller door. When I enter code to set alarm but stay in the workshop it will not set it just continuously beeps. When I open the roller door to leave the lcd display then changes to "setting fault front door" Roller door is zone 1 pir zone 2 Its...

Okay - after lots of help from here I finally got everything installed and thought I had it sorted - sadly no! I went to set the alarm for the first time today and it just wont set? I enter the code in the keypad and the display then changes to "program 1 set" , which according to the manual...

Well I never - its only WORKING!!! Linked the tamper circuit - no joy Linked the keypad tamper - fault disappeared! Removed keypad fascia, checked tamper spring - kept pressed in when removed from wall - fault disappeared. It would seem that the keypad tamper spring was not compressed enough...

Ok - I have done exactly as instructed above and connected the power tonight to set the system up. I connected the power, alarm went off, entered code and silenced. Closed panel to set tamper. audible click heard. I have managed to set the time, zone 1 and 2 marked used the rest as not used...

You mean just cut some small lengths of alarm wire (lets say red) and link each zone? same as some of the small wire links I had to remove for some of the connections?

Sound bomb? Can you give me a link to one I can buy please?

If I fit an internal speaker will that also sound at the same time as the external siren if the alarm is triggered as well as replicating the key pad sounds? That would be an extra deterrent having your ears riniging in my small workshop

Thanks - the key pad is only a few feet away from the panel next to the roller door. Do you think I need a speaker in the panel?

Great - Thanks How does this look? Am I good to go? Connect power and set program? Zone 1 Door Zone 2 PIR Green Tamper from Door and PIR connected together and heatshrunk Yellow tamper from PIR and Door to Tamp on panel PIR red in 13v PIR black in 0v

Hi All I've just finished installing my Accenta G4 in my workshop. I have connected the siren box to the panel TR white V- Black ST Green V+ Red S Yellow and remote LCD panel to the panel 0v Black 13v Red Comms - White Sound Blue Tamp yellow Tamp Green I only have the PIR and door...