Search results

No problem, I'm happy enough with building the plinth, tiling and silicone as I've done quite a bit before in a previous job but never Tanking. Thanks again

Thanks. No access as it's a Bungalow. Think I will go with the plinth as will be easier if any problems in the future. From what I've seen of the Tanking, the tray gets fitted first and then overlap onto the tray. Is it better to do as you suggest and tank the plinth then got the tray? Thanks

I'm replacing all the ensuite in the en suite. My plan in order: No more ply Lay shower tray (on floor direct or riser) Tank Tile/ shower boards Floor Fit toilet/sink Just looking at what will be best for the shower tray. It will be a stone resin shower tray, on top of no more ply (to cover the...

Thanks for that. As the Downlights are class 2, when I connect the main T + E to the first downlight do I connect the Earth anyway even though it says not needed? I have plastic boxes and will be putting metal switch plates on. Thanks

Looking at changing the wiring to 2 Downlights and get rid of a junction box and be able to control both of each switch. The first image is of what is currently present. The second is what I'm looking to do. Currently 1 switch does only 1 light so I'm looking to control both lights off each...

Oh!! We were hoping to keep this wired system due to having the shock sensors as these will go off before a forced entry. Even if it meant just keeping the wiring from each of the window/door contacts and putting a new panel in. Might have to go for a wireless with only door contacts and a...

Do you think it would be best to get a new panel? Or rip all the wiring out and a full new system? Thanks

Apologies for that. Try those. Thanks

Hi Sparky Attached are images of the panel. Anything else you need?

Much appreciate the time and help. I will get a photo this evening after work. Thanks

Zone 2 is back door, side window, and lounge X2. All shock sensors. Zone 1 is front door, bathroom, and bedrooms. Front door and Bathroom has the shocks replaced with the 2 part magnetic contacts. So as far as I can see all entry points have a contact in place.

Is that normal/correct for it to be wired that way then? I will have a look after work this afternoon. I disconnected the main power to it. I will attach a picture later of the board for you to take a look at if that is ok? Another thing I noticed, There are 2 blue wires not connected...

Good Evening I have inherited a Scantronic 9448+ plus alarm system at the new house. When I try to set the alarm, Zone 2 would light up. When the alarm was NOT set the sensors in Zone 2 would flash. These are shock sensors. I replaced the sensors in Zone 2 but as I was changing the last one...