Search results

You can go into Engineering and zone setup and put the zone on chime. or You can go into master, user menu, put zone you want on chime. exit the menu if the zone doesnt chime, press chime on the keypad and try again

I would have to work my way through the installation manual and check the programing. sorry

If you use com-ip com port 1 is easiest. (baud rate auto adjusts) if using com port 2, you need to change the modem (com 2 baud rate )speed to 19200 either using wintex coms, radiopad and com port tab, right hamnd side com2 baud rate select 19200. by the keypad, engineers code, 7...

Without turning the tones off full stop. Program an output as control timer wire the output into the last zone terminal of the spare zone program as Latch key, silent you will get the short confirmation beep to say its armed, but not the long exit tones. any problems pm me and we...

Yes its possible to do it quietly, but would involve outputs and wiring (one wire) and a spare zone (kevinherring asked for something similar before Christmas) Secondly do you have chime on in the control timers section, I would have to double check your version but i know that some versions...

he has to keep that one under wraps

So the tamper didn't clear after typing your code in and pressing reset. If you have access to the engineers code (default 1234), type this in press program, all your zone lights should light up. Press 19, this should take you to a latching walk test, if the tamper light is on it should...

Well said europlex

Do you have the alarm model and the codes? Removing power will trigger the the external bell (depending on bell). Some systems have a hold off mode so you can disconnect the sysyem without annoying your neighbours.

The shed been attacked a few times, just you mention the last lot. Someone knows you have stuff worth stealing from your shed. Its not unusual for a person to be robbed several times, first time and again when the the stuff has been replaced by the insurance. Sally is right about the...

Look at the prices of the wireless kits and what comes with them. Wireless detectors are expensive to buy compared to hardwired ones. 12w can have 8 wireless devices in total 24w can have 16 wireless 48 can have 32 wireless the rest can be made up hard wired, 4 hardwired zones on...

How many zones/ areas do you want around the property? How many wireless how many hardwired?

socdesign, which panel and version do you have? The older panels (except the 24) will work with the apps if they have simple protocol (except smart key), problem is it will tend to disconnect if you don't change the com-ip setting and program comport as not used, this doesn't affect wintex...

When you mean monitored is this for you personally or for an ARC. It is possible on many systems but the answer may differ it its for you personally or not. Texecom Elite Range Personal:- GSM will send you alarm activations and you can control the unit remotely with simple commands...

Get a few bedroom fitters to come round and give you quotes and show you some designs, this way you can see whats on offer and how much it would cost. You can decide to go elsewhere, or diy as you can buy the parts needed all over, but see what designs they come up with. We have a local...

Not overally familiar with these but looks like you may have to wire in a smple set unit to accept the tags/fobs. http://www.alertelectrical.com/uploads/prod/ade%20optima%20accenta%20g4_1.pdf

Its up to you how far you want to push it. but they cant impede your use or view Lets face it should just be a replacement cable, so you should have noticed no change.

disgusting and it shouldn't cost you a penny to get resolved if the route suggested does not get you the require result. You can try [email protected] CE at BT Group. If you cant use your window is it an escape route from your property during a fire? I tend to find that...

Okay. have you done a walk test and does zone 2 activate correctly. zone 2 would normally be a walk through zone, so that if you open the e/e exit door then walk in front of zone 2 it doesnt go into alarm. if you set the alarm and walk in front of zone 2 without opening the door does...

unfortunately the Veritas range does not use remote expanders and is limited to 8 zones only. You could could add a ricochet expansion pack or similar and extend wirelessly but that requires wiring in the unit to the panel and learning ion a wireless device and placing it in situ.