Search results

Had a carpet and quality u/lay put down. Floorboards are showing through not level. Carpet guy says fit 4mm ply but the actual fitters say use 6mm. Also are ring nails ok. Any advice would be great. BOB

Thanks for that gcol will give it a go!

Done a bit of tiling over the years never any problem. Am stumped with this one. has anyone ever, or know if you can tile over a shiny black laminate splash back currently on the walls. Seems like a lovely flat surface and is well fixed(presumably) with NMN. Will tile adhesive stick ? can you...

Thanks thought that would be the case. Although there are many posts saying the flow would be ok thats not my experience. Would 1.5 bar pump be ok as I am not bothered about being relentlessly bombarded( My daughters house has pumped showers and they use a ridiculous amount of water and make you...

I fitted a mixer shower using the Cold water tank and teed off the hot water tank. Despite there being a head betwwen the cold tank and the shower head the flow is rubbish. it does get a lot better when the mixed it turned to cold. Any ideas.

Ok thanks fo that. As the pump fitted with a plug I assumed this was ok. The cabling is coming out of the attic so can I just fit a FCU in the attic and fixed wirning to a pump in next to the cylinder. Presumably the pump will need earth bonding.

Thanks for that. will pump sited at base of cylinder in the bathroom be ok and pump plugged into a socket taken from the FCU. THANKS

Hi Can anyone let me know if this is ok. I am replacing an electric shower with a mixer and pump. Can I use the existing wiring which is connected the the consumer unit to supply the new pump. I realise the MCB will be need to be replaced(Currently 40A will change to 5A) Will I then need to fit...