Search results

If I go into engineer mode will that not disable the bell tamper? It disables all the other tampers.

Anyone know how to put a Risco Nova 2 bell-box into hold-off mode? It's connected to a Texecom 64w panel. Wanting to replace the internal battery and a bit of a cleanup. Also possibly change mode to SCB as maybe adding a 2nd Texecom bell-box. Below is a pic from when the cover was last off but...

"As it happens I have a new LCDLP hardwired keypad and new smart key spare if your interested left over kit parts." What would you want for them?

Ok, this is how I'm going to do it. Going to run an 8 core cable to garage from house panel (64w) 4 cores to be used for wired keypad and remaining 4 cores as spares for possible future zone expander. This is what I want in garage: 1 x wired keypad (for the 2 extra wired zones it provides) 1...

Daft question I know but....can a smartkey arm/disarm via a wireless sensor (PIR or door contact), or will it only talk to a keypad or panel? So for instance, no panel or keypad in garage only a PIR and 2 door contacts. Will a smartkey arm/disarm these sensors (they'll be separate on Area B)?

See pic of back door and proximity of house to garage. I'm torn between running 6 x 6 core cables from house (from the loft running down back of drainpipe in black trunking and under block paving into garage) ....and... putting in a separate system comprising of.. 64w live panel (onboard...

Yes, I could do and make the garage Area "B". But if I'm buying another keypad, I may as well go the whole hog and get a full system that contains panel, keypad, sensors and a remote arm/disarm fob so it can be armed/disarmed from the house. It'd also mean I wouldn't have to worry about how to...

Hi guys, I have a detached double garage about 1 metre away from house. House is fully alarmed but garage isn't and I want it to be. Thing is, there's so many scenarios and considerations if extending the house alarm to the garage. For example, you full set the house alarm and then exit house...

Lesson learned..

I've just put everything back to default including EN & PD and the system is working like a champ. Part arm banner behaviour as required! Only setting I've kept changed is "show armed areas" option 4 changed to hide. This is because I don't want the display flicking between the part-armed...

Looking at your last post, I'm not sure why some of my settings differ from default (hmm).. I think what may have happened is that somewhere along the line, I've made changes in Wintex and not sent them to the panel. Or, made a change at the keypad and forgot to receive data in Wintex. That...

I'm keeping EN & PD both off as on a bells only domestic system I'm not sure they're necessary. It's working like I want it to now so as the old saying goes, "if it ain't broken, don't fix it". Only thing left to sort is figuring out how to wire a 2 wire internal sounder into the keypad but...

Do I need to bother mapping? Can I not just connect one sounder wire to keypad spk terminal and the other wire to either 0 or 12V keypad terminal (I'm not sure which one?). Would it be red to spk terminal and black to 0V terminal (or 12V??) or vice versa?

Premier Elite 64w I currently don't have a separate internal sounder (other than the keypad speaker). However, I'd like to install a wired one next to my wired keypad in hallway downstairs. Can I wire it into the keypad zone 1 and then map keypad zone 1 to a spare zone in the main panel? Can a...

SUCCESS! Finally figured out how to get part-set banner to stick. With both EN and PD options disabled and panel grade 2, I had to change global options 36 to Keypad global (was previously set to keypad local) and also hide keypad areas (otherwise display alternates between part-set banner and...

The backup only generates 3 files.

Sent to your email.

Thanks. Will do.

Cheers. What do I need to do in Wintex to send you the profile? Do I just backup the account (which seems to create 3 files)?

Nope! EN & PD both disabled (and grade 2 enabled) and still no luck. However, I've noticed with these 2 disabled there's an orange LED on the part set icon which is an indication that the system is part-set. A bit of progress as it wasn't there prior to disabling EN & PD. At least I now have a...