Search results

When drilling holes through a unit to put the washing machine in the space next to the sink. Do you need to drill through as far back i.e as close to the wall as possible. And the drill through the back of the sink unit. Or would drilling a hole say 2inch in though the unit be ok so the holes in...

just wonderd as i no some firms I have worked for before haven't had any put in.

If no inhibitor is put in the c/h system. How long will it take for signs of corrosion.

Any one got any experience with fitting the white shower doors with a side panel for a shower tray in a corner. I think there the cheapest ones you can get from plumbcentre

ok so are you saying I won't no what diameter the lead is until I cut it can't I measure the outside diameter without cutting it?

Thanks doitall. What size is the lead pipe usualy 3/4 and 1/2 inch? Is this the outside diameter. Thanks for your help.

hey I have a private job to do fitting a bathroom. The toilets going back in same place and the stack is ok for the new toilet. basin in same place and bath. However all the pipe work needs cutting back and repiping as its in lead. The waste for the bath and basin thats goes in to an outside...

Is the games :D

thanks doitall so do the fittings come with a special grad ring for lead. Thanks for your help

ok there is a supply there as I'm just swapping an old boiler

are these fittings one size fits all? or is the different sizes.

yes is for water

how much would an electrician charge to wire up a combi boiler thanks for any help.

ok thanks I would prefer to use these as I have heard lead locks can be prone to leaks. Were can i purchase these fittings from and how much do the cost?

hey I wondered if anyone has used Philmac transitional couplers to connect lead to 15mm copper. I thinking these could be easier then lead locks. Thanks for any advice