Search results

The water level should be about half way, but try pushing the ballvalve down to see if its stuck.

Try checking the f and e tank that fills the radiators up incase the ball valve is stuck this could be why you have air problems :wink: :wink:

Been speaking to a guy whose just been on a unvented course at baxi, and he mentiond that yet another training course will be needed for the clorification of unvented cylinders in the future, will it ever end. Has anyone else heard of this. :evil: :evil:

baco is right what he is saying, but the cold pressure on the gauge would normally be set around 1 or 1.5 bar.You can check the correct pressure in your maufactures hand out. :wink: :wink:

Check that the pump is running first by holding a srewdriver to the pump and putting the other end to your ear, also check that the boiler turns off when you turn of the boiler thermostat. :wink: :wink:

Q tips, hair clips, paper clips, finger tips, take a tip, only if you need to. :) :) :)

Most condenceing boilers are now intoduceing plumeing kits which in some cases bosts 6m in length. They fix on the flue outlet but remember the nusance factor it can cause in some cases. :wink: :wink:

Well thanks for your input, but i think this law will only make the none compliant fitters richer while others have to walk away if you abide by the law. I'd like to scalp her. :twisted: :twisted:

I would whant to know why was the system so black in the first place and rectify the problem. :wink: :wink:

Could some of the lads clarify for me, where we stand as fitters when we change cylinders and controls? Is it a must by law that we change the poor old ladys rad valves to T.R.Vs who can just about afford to pay for the cylinder change, because some of the leaflets that ive recieved from the...

Which Baxi boiler is it ? :roll: :roll:

I think Chris might just have the last word hear. :wink: :wink:

Last December i had a company round to install sky into my property, and after 20 minutes of scratching his head he finaly got round to doing some work.we had one of those systems with a magic eye, which ment you could watch sky in an other room if you wanted to.Well he finished and gave me my...

It sounds like your bathroom rads are teed off the heating primerys, which means they will heat up every time the hot water calls for heat,that is why the radiator valves were balanced down. :wink: :wink:

Was the old toilet raised on a plinth which makes the soil stack branch higher? If not i can't see way a Multiquick pan connector can not be used. :wink: :wink:

Why do you think you need a new heat exchanger, is it cracked and leaking? Have you tried flushing the system out with a flushing machine and chemicals.

Read the manual with the pump, and you will see minimum dimensions to install below the storage tank.You might find that you have to raise the tank,or even buy a negative head pump. :wink: :wink:

If you are useing a camara bye law you must have a sign warning the fact :) :) :) :)

Sounds like the pump to me. Could check the boiler thermostat and see if the boiler turns off when you lower the temp :wink: :wink:

This system is in need for an upgrade, your fuel bills must be sky high.Find your self a nice corgi man to give you an estimate for a fully pumped system complying to part L 1 :wink: :wink: