Search results

After doing a bit of research on this myself. There is a lot of positive talk on making your own using Cat5 network cabling it involves braiding together 3 cables, also twin and earth gets some good reviews it's to do with the solid conducters rather than stranded. Personally speaking the...

Works for me, can't help with your framing problem though.

If you have the time you could try this little winter project. http://www.newyankee.com/getproduct3.cgi?0301

Try Nu-heat they do systems for various floor substrates. www.nu-heat.com/index.cfm?fuseaction=home.constructions#susTim

Hi all, I know there is not going to be a definitive yes /no to this question. I have just purchased a semi detached bungalow and have BIG :P plans for extension new central heating etc The semi is about 8 years old, below is a rough draft of what I would like, you’ll notice the...

Thanks Guys , Is there one that shines above the rest or do they all do a similar job.

I'm running out of USB ports, should I go for a powered hub or a standalone one i.e just plug it into the usb port and away I go. What are the disadvantages/advantages. Is it worthwhile upgrading to USB2 when I'm at it. (Printer is USB2 friendly,Epson R300) Thank you

Thanks all The readings were 66ohms +/-0.4 over the 3 elements. Problem was the heater was not very hot when at the usual setting, so I have swapped thermostats with another heater and after a 1 hr boost the fault would appear to be in the other heater now. So new thermostat needed me thinks.

Can anybody tell me approx what reading I should get across the element (ohms) using a multimeter or are these better tested using a meggar. (If thats how you spell it) Thank you

Whats with the Screwfix site being down on a regular basis now,surely they could disable the ordering facility but leave the site online for browsing, access to the talk section is also not available. Rant over :oops:

Thanks for that link Kedsy I actually downloaded The ultimate trouble shooter and after using it my comp is certainly a lot quicker. 1 more point I'm running 256mb ram am i pushing my luck so to speak, and would i benefit going up to 512mb its an Athlon 700.

When I ctrl/alt/delete I am informed that I have 42 processes running. Now I know that if i go to run and type msconfig.exe I can find these items. My question is how do I know which ones I need and how do I stop them starting (is it just by unchecking the box) I'm pretty sure this is what...

If you hold a heavy hammer on one of the flats and hit the opposite flat a few times with another hammer this has the effect of distorting the nut slightly and releasing the grip on the threads, do all 6 flats. Works well on steel union couplings etc, your pipework may need to be reasonably...

Just out of curiosity does a lintel have to be installed once the hole has been cut?

mmm....helpful :?