Search results

excavated the clay waste pipe today and a trench to the edge of the house. fall is fine so thats good. can someone confirm that i can simply tee into this ? is it ok with the tee on the horizontal or can i have the tee pointing vertical so the waste enters from the top. any help...

hope thats the case . will get the spade out to confirm the depth of it whats the best for connecting into the clay. tee and a couple of flexicons ? also were in scotland are the regs the same regard building control thanks

fitting heating in my m8's new house at the moment. his wife came in today and asked if possible to make the big cupboard in the hall into a downstairs loo. have had a look and it not easy to get the waste away . the soil stack for the property is approx 6m away but the outside...

needing a garage built 8m x 6m mate from works brother is a brickie. i'm doin the base . he says he will supply the blocks and build the walls for £750 cash in hand does this sound ok as it sounds very cheap ? also how thick a base do i need to build and whats the rough price...

http://search.ebay.co.uk/_W0QQfrppZ50QQfsooZ2QQfsopZ32QQlredZAny00000QQrdZ0QQsassZtpispecials

i was part of a mass redundancy m8 and qualified for the training for work scheme

i did an nvq3 . full time. 28 weeks class work and 11 weeks on placement with local firm. when finished i got my own corgi no problem. had to show my workplace diaries for the eleven weeks and answer the usual questions they ask. Course didn't cost me as it was a training for work scheme...

The 30 Si is a combi . Basically a junior with a dhw temp control knob . 12.3ltrs at 35 degrees

thinking of buying one of these (not the newest model) Anyone had any experience with any of these vans

Was working fine till today. Now it lights and goes out for 3 or 4 times then reset and blue light flash and shows ea in the display . Doesn't continually spark after its lit and flue appear to be fine. Any help appreciated

second on down on that page

fan has become noisy and causing bad vibration is this a common problem ? can this be repaired or is a new fan assy rqd thanks

Can any one mail me the above e-mail link removed cheers

we use sentinel jetflush machines at work . They have a big round tub that the machine sits in to catch any spillage. Also they are not easy broken due to the type of plastic its made from .

this looks like diy gone horribly wrong. Sure most corgis can rebuild it

Just fit a new siphon. cheap to buy and less of a hassle

Sadly the current systen is all 8mm to the rads

need to move a couple of rads . these are drop fed and are currently in unsightly trunking. if i chased out the wall and put 8mm white pvc coated pipe in it and plastered over would the plaster crack or will the pvc be enough insulation ?

i had this same problem once. . water was present at the filling loop but not getting into the system. i removed the double check valve and the pipe was blocked with crud. poked it all out and flushed the system and it was sorted

How many wires should this have ? From what i've found it should be brown , blue and green/white. the one i saw today says Sundial y plan diverter valve on top of it but it has white, grey , orange and blue wires Would that not make it a mid position valve ?