Search results

Hi, Removed old integrated dishwasher today (fitted with kitchen) and found that the backing had melted onto the plug, see pics attached. The old dishwasher never sat 100% flush and now I know why, the plug socket plus plug does not leave enough space for the dishwasher to be pushed back...

I sympathise....I had a Coram alcove shower tray, it used to bend like a banana when someone stood in it. Have a look underneath when someone is showering (I know, I know) to see where the leak is actually coming from. 2mm is a pretty big gap to plug....if it were me personally i'd rip it out...

I guess because if you dont any new silicone will only be stuck to the old silicone which is coming away anyway and not to the plastic. Try and remove as much as you can for the best seal.

I've used that Unibond stuff in the past and it didn't work well sealing my bath, same problem wouldn't stick. I have since always used Dow Corning 785, I swear by the stuff.

Get some bigger white plastic caps to go with the bigger screws? Have you drilled the holes into the wall frames too big? or were the holes pre-drilled?

From what I read you cant on the diesels but on the petrol engines Vauxhall do a blanking plate....the ECU can then be programmed to forget about the EGR.

Thanks for both the replies. Car is back into garage next week for service so am getting them to look at EGR valve again. Seems to be an achilles heal on these cars....car gets 95% of its used around town at 30 mph so maybe this is actually exasperating the situation....if it did longer runs...

Hi, Vauxhall Zafira A 2004 2.0DTi Y20DTH engine. Anyone know if the EGR valves are electronic on this engine i.e. what opens and closes them? Mine is same as attached pic and does have a multiplug going into it. Do they open gradually as engine revs increase or are they just...

I had a look again tonight....I tested with the cartridge screwed all the way in and out but the temp. did not change...I also check the service valve on the hot and it's fully open

Type of card please :?: and size :?: make and model of PC :?:

well I stripped down the valve yesterday and could not see any non-return valve...and when I reassembled and tested the shower did not seem to be passing cold water into the hot circuit any more but the shower itself just doesn't get hot enough even on the highest setting...I even put the water...

Hi, I thought I originally had a boiler problem but turned out my Bristan Calico bar mixer shower valve is passing cold water into the hot water circuit. I phoned Bristan to ask about this and the guy on customer support told me that the non-return valve on the hot side of the mixer must...

I'm afraid so...we had about 15 of these at work and this is what happens when the battery is no longer charging properly...you should also notice the machine doesn't last long on battery.

link