Search results

Has anyone come across air locks in shower pumps? Cannot at all fathum out what is causing this. Only thing I can think it may be is the connection from the cylinder (think its a surrey flange) Any advice would be appreciated cheers phil

thanks very much for your response! but just another quicky! Is it ok to increase the micro bore from 10mm to 15mm on one the rads i have capped off? as i want to relocate it... (it will be only the last couple of feet leading to the rad)

I am in the process of adding two new radiators. my central heating is in micro bore (10mm) (pumped off a header tank) I have found the 'source' the 22mm pipes where all the micro bores T into. just a few questions to put out; When I T into the 22 pipes can i use 15mm pipe instead of...

Thank you very much for your help, much apprciated. think im going to go for the 15mm option, i just need two 22,22,15 t's on each the flow and return. it might be a stupid question but is there a rule where or where not to T into these pipes?? or as another thought could i tee into...

just had a two storey extention built. I have three new rads i would like to add on. the house has a convensional heating system (header tank etc.) linked to a potterton boiler and the rads run off micro bore (10mm). rad No. 1 is just a replacement on a different wall, so think i can...

can thermostatic radiator valves cause any noise???

is it worth pulling up floor boards to see if pipes are close together?

combi boiler couple of years old, most of the pipe work is new, some is old to a couple of rads up stairs. every morning when the heating comes on there is a horribe clanging noise from the pipe work, it is hard to pin point where the noise is coming from. is there a way of solving this or...

thanks for your reply just wondered, did you use an extension, and if so how long can you get them.. cheers

The dishwasher i am installing is about 3 metres away from nearest trap (wash m/c stand pipe) and no where near to an ext. wall. -Is it ok to run waste pipe this far? (think i can get a slight fall if i run behind cupboards) -Can you get an extension? or should i just run 1 1/2" pipe...

The dishwasher i am installing is about 3 metres away from nearest trap (wash m/c stand pipe) and no where near to an ext. wall. -Is it ok to run waste pipe this far? (think i can get a slight fall if i run behind cupboards) -Can you get an extension? or should i just run 1 1/2" pipe...

Hi there, faily new to the trade and just had a customer call, wanting a dishwasher plumbing in. The problem is it's not near an external wall and the sink is at the other end of the room, to where the dishwasher wants to be. Just wondered if there were any other options other than...